实体模型特性 (Entity Model Features)

1.21.5-pre

- fixed 2 settings being reset incorrectly when settings are reset to default via the GUI

- fixed 2 settings being reset incorrectly when settings are reset to default via the GUI

- fixed 2 settings being reset incorrectly when settings are reset to default via the GUI

- fixed 2 settings being reset incorrectly when settings are reset to default via the GUI

- fixed 2 settings being reset incorrectly when settings are reset to default via the GUI

- fixed 2 settings being reset incorrectly when settings are reset to default via the GUI

- fixed 2 settings being reset incorrectly when settings are reset to default via the GUI

- fixed 2 settings being reset incorrectly when settings are reset to default via the GUI

- fixed 2 settings being reset incorrectly when settings are reset to default via the GUI

- fixed 2 settings being reset incorrectly when settings are reset to default via the GUI

- fixed 2 settings being reset incorrectly when settings are reset to default via the GUI

- fixed 2 settings being reset incorrectly when settings are reset to default via the GUI

- fixed 2 settings being reset incorrectly when settings are reset to default via the GUI

- fixed 2 settings being reset incorrectly when settings are reset to default via the GUI

- fixed 2 settings being reset incorrectly when settings are reset to default via the GUI

- fixed 2 settings being reset incorrectly when settings are reset to default via the GUI

- fixed 2 settings being reset incorrectly when settings are reset to default via the GUI

- fixed 2 settings being reset incorrectly when settings are reset to default via the GUI

- fixed 2 settings being reset incorrectly when settings are reset to default via the GUI

- fixed 2 settings being reset incorrectly when settings are reset to default via the GUI

- added `helmet`, `chestplate`, `leggings`, and `boots` partial armor model support. e.g. `helmet.jem`, each piece can be varied separately e.g. `helmet.properties` (1.21.2+ ONLY!, for now)
- added fallback properties support to match OptiFine behaviour. e.g. `drowned_outer.jem` will vary with `drowned.properties` if `drowned_outer.properties` doesn't exist. (The latter is only possible via EMF as OptiFine will only use `drowned.properties`)
- reduced log spam for certain loading warnings
- prevented some unimportant exceptions from triggering the load error warning toast
- math functions that allow string inputs can now use `\` to escape the `,`, `(`, `)`, & `\` characters, such as when needing a `,` in one of the inputs for `nbt()`. e.g. `nbt(Test,text='this\, that')`
- fixed whitespace characters in functions that allow string inputs
- fixed all minecart variants only using the `minecart` model in 1.21.2+, they now correctly use it as a fallback only
- fixed boat and minecart variant animation parameters
- fixed layer models not rendering in 1.21.2+
- fixed an issue with chest models in 1.21.2+
- fixed some config translation logic
- fixed `move_forward` & `move_strafing` breaking for other entities in multiplayer

- added `helmet`, `chestplate`, `leggings`, and `boots` partial armor model support. e.g. `helmet.jem`, each piece can be varied separately e.g. `helmet.properties` (1.21.2+ ONLY!, for now)
- added fallback properties support to match OptiFine behaviour. e.g. `drowned_outer.jem` will vary with `drowned.properties` if `drowned_outer.properties` doesn't exist. (The latter is only possible via EMF as OptiFine will only use `drowned.properties`)
- reduced log spam for certain loading warnings
- prevented some unimportant exceptions from triggering the load error warning toast
- math functions that allow string inputs can now use `\` to escape the `,`, `(`, `)`, & `\` characters, such as when needing a `,` in one of the inputs for `nbt()`. e.g. `nbt(Test,text='this\, that')`
- fixed whitespace characters in functions that allow string inputs
- fixed all minecart variants only using the `minecart` model in 1.21.2+, they now correctly use it as a fallback only
- fixed boat and minecart variant animation parameters
- fixed layer models not rendering in 1.21.2+
- fixed an issue with chest models in 1.21.2+
- fixed some config translation logic
- fixed `move_forward` & `move_strafing` breaking for other entities in multiplayer

- added `helmet`, `chestplate`, `leggings`, and `boots` partial armor model support. e.g. `helmet.jem`, each piece can be varied separately e.g. `helmet.properties` (1.21.2+ ONLY!, for now)
- added fallback properties support to match OptiFine behaviour. e.g. `drowned_outer.jem` will vary with `drowned.properties` if `drowned_outer.properties` doesn't exist. (The latter is only possible via EMF as OptiFine will only use `drowned.properties`)
- reduced log spam for certain loading warnings
- prevented some unimportant exceptions from triggering the load error warning toast
- math functions that allow string inputs can now use `\` to escape the `,`, `(`, `)`, & `\` characters, such as when needing a `,` in one of the inputs for `nbt()`. e.g. `nbt(Test,text='this\, that')`
- fixed whitespace characters in functions that allow string inputs
- fixed all minecart variants only using the `minecart` model in 1.21.2+, they now correctly use it as a fallback only
- fixed boat and minecart variant animation parameters
- fixed layer models not rendering in 1.21.2+
- fixed an issue with chest models in 1.21.2+
- fixed some config translation logic
- fixed `move_forward` & `move_strafing` breaking for other entities in multiplayer

- added `helmet`, `chestplate`, `leggings`, and `boots` partial armor model support. e.g. `helmet.jem`, each piece can be varied separately e.g. `helmet.properties` (1.21.2+ ONLY!, for now)
- added fallback properties support to match OptiFine behaviour. e.g. `drowned_outer.jem` will vary with `drowned.properties` if `drowned_outer.properties` doesn't exist. (The latter is only possible via EMF as OptiFine will only use `drowned.properties`)
- reduced log spam for certain loading warnings
- prevented some unimportant exceptions from triggering the load error warning toast
- math functions that allow string inputs can now use `\` to escape the `,`, `(`, `)`, & `\` characters, such as when needing a `,` in one of the inputs for `nbt()`. e.g. `nbt(Test,text='this\, that')`
- fixed whitespace characters in functions that allow string inputs
- fixed all minecart variants only using the `minecart` model in 1.21.2+, they now correctly use it as a fallback only
- fixed boat and minecart variant animation parameters
- fixed layer models not rendering in 1.21.2+
- fixed an issue with chest models in 1.21.2+
- fixed some config translation logic
- fixed `move_forward` & `move_strafing` breaking for other entities in multiplayer

- added `helmet`, `chestplate`, `leggings`, and `boots` partial armor model support. e.g. `helmet.jem`, each piece can be varied separately e.g. `helmet.properties` (1.21.2+ ONLY!, for now)
- added fallback properties support to match OptiFine behaviour. e.g. `drowned_outer.jem` will vary with `drowned.properties` if `drowned_outer.properties` doesn't exist. (The latter is only possible via EMF as OptiFine will only use `drowned.properties`)
- reduced log spam for certain loading warnings
- prevented some unimportant exceptions from triggering the load error warning toast
- math functions that allow string inputs can now use `\` to escape the `,`, `(`, `)`, & `\` characters, such as when needing a `,` in one of the inputs for `nbt()`. e.g. `nbt(Test,text='this\, that')`
- fixed whitespace characters in functions that allow string inputs
- fixed all minecart variants only using the `minecart` model in 1.21.2+, they now correctly use it as a fallback only
- fixed boat and minecart variant animation parameters
- fixed layer models not rendering in 1.21.2+
- fixed an issue with chest models in 1.21.2+
- fixed some config translation logic
- fixed `move_forward` & `move_strafing` breaking for other entities in multiplayer

- added `helmet`, `chestplate`, `leggings`, and `boots` partial armor model support. e.g. `helmet.jem`, each piece can be varied separately e.g. `helmet.properties` (1.21.2+ ONLY!, for now)
- added fallback properties support to match OptiFine behaviour. e.g. `drowned_outer.jem` will vary with `drowned.properties` if `drowned_outer.properties` doesn't exist. (The latter is only possible via EMF as OptiFine will only use `drowned.properties`)
- reduced log spam for certain loading warnings
- prevented some unimportant exceptions from triggering the load error warning toast
- math functions that allow string inputs can now use `\` to escape the `,`, `(`, `)`, & `\` characters, such as when needing a `,` in one of the inputs for `nbt()`. e.g. `nbt(Test,text='this\, that')`
- fixed whitespace characters in functions that allow string inputs
- fixed all minecart variants only using the `minecart` model in 1.21.2+, they now correctly use it as a fallback only
- fixed boat and minecart variant animation parameters
- fixed layer models not rendering in 1.21.2+
- fixed an issue with chest models in 1.21.2+
- fixed some config translation logic
- fixed `move_forward` & `move_strafing` breaking for other entities in multiplayer

- added `helmet`, `chestplate`, `leggings`, and `boots` partial armor model support. e.g. `helmet.jem`, each piece can be varied separately e.g. `helmet.properties` (1.21.2+ ONLY!, for now)
- added fallback properties support to match OptiFine behaviour. e.g. `drowned_outer.jem` will vary with `drowned.properties` if `drowned_outer.properties` doesn't exist. (The latter is only possible via EMF as OptiFine will only use `drowned.properties`)
- reduced log spam for certain loading warnings
- prevented some unimportant exceptions from triggering the load error warning toast
- math functions that allow string inputs can now use `\` to escape the `,`, `(`, `)`, & `\` characters, such as when needing a `,` in one of the inputs for `nbt()`. e.g. `nbt(Test,text='this\, that')`
- fixed whitespace characters in functions that allow string inputs
- fixed all minecart variants only using the `minecart` model in 1.21.2+, they now correctly use it as a fallback only
- fixed boat and minecart variant animation parameters
- fixed layer models not rendering in 1.21.2+
- fixed an issue with chest models in 1.21.2+
- fixed some config translation logic
- fixed `move_forward` & `move_strafing` breaking for other entities in multiplayer

- added `helmet`, `chestplate`, `leggings`, and `boots` partial armor model support. e.g. `helmet.jem`, each piece can be varied separately e.g. `helmet.properties` (1.21.2+ ONLY!, for now)
- added fallback properties support to match OptiFine behaviour. e.g. `drowned_outer.jem` will vary with `drowned.properties` if `drowned_outer.properties` doesn't exist. (The latter is only possible via EMF as OptiFine will only use `drowned.properties`)
- reduced log spam for certain loading warnings
- prevented some unimportant exceptions from triggering the load error warning toast
- math functions that allow string inputs can now use `\` to escape the `,`, `(`, `)`, & `\` characters, such as when needing a `,` in one of the inputs for `nbt()`. e.g. `nbt(Test,text='this\, that')`
- fixed whitespace characters in functions that allow string inputs
- fixed all minecart variants only using the `minecart` model in 1.21.2+, they now correctly use it as a fallback only
- fixed boat and minecart variant animation parameters
- fixed layer models not rendering in 1.21.2+
- fixed an issue with chest models in 1.21.2+
- fixed some config translation logic
- fixed `move_forward` & `move_strafing` breaking for other entities in multiplayer

- added `helmet`, `chestplate`, `leggings`, and `boots` partial armor model support. e.g. `helmet.jem`, each piece can be varied separately e.g. `helmet.properties` (1.21.2+ ONLY!, for now)
- added fallback properties support to match OptiFine behaviour. e.g. `drowned_outer.jem` will vary with `drowned.properties` if `drowned_outer.properties` doesn't exist. (The latter is only possible via EMF as OptiFine will only use `drowned.properties`)
- reduced log spam for certain loading warnings
- prevented some unimportant exceptions from triggering the load error warning toast
- math functions that allow string inputs can now use `\` to escape the `,`, `(`, `)`, & `\` characters, such as when needing a `,` in one of the inputs for `nbt()`. e.g. `nbt(Test,text='this\, that')`
- fixed whitespace characters in functions that allow string inputs
- fixed all minecart variants only using the `minecart` model in 1.21.2+, they now correctly use it as a fallback only
- fixed boat and minecart variant animation parameters
- fixed layer models not rendering in 1.21.2+
- fixed an issue with chest models in 1.21.2+
- fixed some config translation logic
- fixed `move_forward` & `move_strafing` breaking for other entities in multiplayer

- added `helmet`, `chestplate`, `leggings`, and `boots` partial armor model support. e.g. `helmet.jem`, each piece can be varied separately e.g. `helmet.properties` (1.21.2+ ONLY!, for now)
- added fallback properties support to match OptiFine behaviour. e.g. `drowned_outer.jem` will vary with `drowned.properties` if `drowned_outer.properties` doesn't exist. (The latter is only possible via EMF as OptiFine will only use `drowned.properties`)
- reduced log spam for certain loading warnings
- prevented some unimportant exceptions from triggering the load error warning toast
- math functions that allow string inputs can now use `\` to escape the `,`, `(`, `)`, & `\` characters, such as when needing a `,` in one of the inputs for `nbt()`. e.g. `nbt(Test,text='this\, that')`
- fixed whitespace characters in functions that allow string inputs
- fixed all minecart variants only using the `minecart` model in 1.21.2+, they now correctly use it as a fallback only
- fixed boat and minecart variant animation parameters
- fixed layer models not rendering in 1.21.2+
- fixed an issue with chest models in 1.21.2+
- fixed some config translation logic
- fixed `move_forward` & `move_strafing` breaking for other entities in multiplayer

- added `helmet`, `chestplate`, `leggings`, and `boots` partial armor model support. e.g. `helmet.jem`, each piece can be varied separately e.g. `helmet.properties` (1.21.2+ ONLY!, for now)
- added fallback properties support to match OptiFine behaviour. e.g. `drowned_outer.jem` will vary with `drowned.properties` if `drowned_outer.properties` doesn't exist. (The latter is only possible via EMF as OptiFine will only use `drowned.properties`)
- reduced log spam for certain loading warnings
- prevented some unimportant exceptions from triggering the load error warning toast
- math functions that allow string inputs can now use `\` to escape the `,`, `(`, `)`, & `\` characters, such as when needing a `,` in one of the inputs for `nbt()`. e.g. `nbt(Test,text='this\, that')`
- fixed whitespace characters in functions that allow string inputs
- fixed all minecart variants only using the `minecart` model in 1.21.2+, they now correctly use it as a fallback only
- fixed boat and minecart variant animation parameters
- fixed layer models not rendering in 1.21.2+
- fixed an issue with chest models in 1.21.2+
- fixed some config translation logic
- fixed `move_forward` & `move_strafing` breaking for other entities in multiplayer

- added `helmet`, `chestplate`, `leggings`, and `boots` partial armor model support. e.g. `helmet.jem`, each piece can be varied separately e.g. `helmet.properties` (1.21.2+ ONLY!, for now)
- added fallback properties support to match OptiFine behaviour. e.g. `drowned_outer.jem` will vary with `drowned.properties` if `drowned_outer.properties` doesn't exist. (The latter is only possible via EMF as OptiFine will only use `drowned.properties`)
- reduced log spam for certain loading warnings
- prevented some unimportant exceptions from triggering the load error warning toast
- math functions that allow string inputs can now use `\` to escape the `,`, `(`, `)`, & `\` characters, such as when needing a `,` in one of the inputs for `nbt()`. e.g. `nbt(Test,text='this\, that')`
- fixed whitespace characters in functions that allow string inputs
- fixed all minecart variants only using the `minecart` model in 1.21.2+, they now correctly use it as a fallback only
- fixed boat and minecart variant animation parameters
- fixed layer models not rendering in 1.21.2+
- fixed an issue with chest models in 1.21.2+
- fixed some config translation logic
- fixed `move_forward` & `move_strafing` breaking for other entities in multiplayer

- added `helmet`, `chestplate`, `leggings`, and `boots` partial armor model support. e.g. `helmet.jem`, each piece can be varied separately e.g. `helmet.properties` (1.21.2+ ONLY!, for now)
- added fallback properties support to match OptiFine behaviour. e.g. `drowned_outer.jem` will vary with `drowned.properties` if `drowned_outer.properties` doesn't exist. (The latter is only possible via EMF as OptiFine will only use `drowned.properties`)
- reduced log spam for certain loading warnings
- prevented some unimportant exceptions from triggering the load error warning toast
- math functions that allow string inputs can now use `\` to escape the `,`, `(`, `)`, & `\` characters, such as when needing a `,` in one of the inputs for `nbt()`. e.g. `nbt(Test,text='this\, that')`
- fixed whitespace characters in functions that allow string inputs
- fixed all minecart variants only using the `minecart` model in 1.21.2+, they now correctly use it as a fallback only
- fixed boat and minecart variant animation parameters
- fixed layer models not rendering in 1.21.2+
- fixed an issue with chest models in 1.21.2+
- fixed some config translation logic
- fixed `move_forward` & `move_strafing` breaking for other entities in multiplayer

- added `helmet`, `chestplate`, `leggings`, and `boots` partial armor model support. e.g. `helmet.jem`, each piece can be varied separately e.g. `helmet.properties` (1.21.2+ ONLY!, for now)
- added fallback properties support to match OptiFine behaviour. e.g. `drowned_outer.jem` will vary with `drowned.properties` if `drowned_outer.properties` doesn't exist. (The latter is only possible via EMF as OptiFine will only use `drowned.properties`)
- reduced log spam for certain loading warnings
- prevented some unimportant exceptions from triggering the load error warning toast
- math functions that allow string inputs can now use `\` to escape the `,`, `(`, `)`, & `\` characters, such as when needing a `,` in one of the inputs for `nbt()`. e.g. `nbt(Test,text='this\, that')`
- fixed whitespace characters in functions that allow string inputs
- fixed all minecart variants only using the `minecart` model in 1.21.2+, they now correctly use it as a fallback only
- fixed boat and minecart variant animation parameters
- fixed layer models not rendering in 1.21.2+
- fixed an issue with chest models in 1.21.2+
- fixed some config translation logic
- fixed `move_forward` & `move_strafing` breaking for other entities in multiplayer

- added `helmet`, `chestplate`, `leggings`, and `boots` partial armor model support. e.g. `helmet.jem`, each piece can be varied separately e.g. `helmet.properties` (1.21.2+ ONLY!, for now)
- added fallback properties support to match OptiFine behaviour. e.g. `drowned_outer.jem` will vary with `drowned.properties` if `drowned_outer.properties` doesn't exist. (The latter is only possible via EMF as OptiFine will only use `drowned.properties`)
- reduced log spam for certain loading warnings
- prevented some unimportant exceptions from triggering the load error warning toast
- math functions that allow string inputs can now use `\` to escape the `,`, `(`, `)`, & `\` characters, such as when needing a `,` in one of the inputs for `nbt()`. e.g. `nbt(Test,text='this\, that')`
- fixed whitespace characters in functions that allow string inputs
- fixed all minecart variants only using the `minecart` model in 1.21.2+, they now correctly use it as a fallback only
- fixed boat and minecart variant animation parameters
- fixed layer models not rendering in 1.21.2+
- fixed an issue with chest models in 1.21.2+
- fixed some config translation logic
- fixed `move_forward` & `move_strafing` breaking for other entities in multiplayer

- added `helmet`, `chestplate`, `leggings`, and `boots` partial armor model support. e.g. `helmet.jem`, each piece can be varied separately e.g. `helmet.properties` (1.21.2+ ONLY!, for now)
- added fallback properties support to match OptiFine behaviour. e.g. `drowned_outer.jem` will vary with `drowned.properties` if `drowned_outer.properties` doesn't exist. (The latter is only possible via EMF as OptiFine will only use `drowned.properties`)
- reduced log spam for certain loading warnings
- prevented some unimportant exceptions from triggering the load error warning toast
- math functions that allow string inputs can now use `\` to escape the `,`, `(`, `)`, & `\` characters, such as when needing a `,` in one of the inputs for `nbt()`. e.g. `nbt(Test,text='this\, that')`
- fixed whitespace characters in functions that allow string inputs
- fixed all minecart variants only using the `minecart` model in 1.21.2+, they now correctly use it as a fallback only
- fixed boat and minecart variant animation parameters
- fixed layer models not rendering in 1.21.2+
- fixed an issue with chest models in 1.21.2+
- fixed some config translation logic
- fixed `move_forward` & `move_strafing` breaking for other entities in multiplayer

- added `helmet`, `chestplate`, `leggings`, and `boots` partial armor model support. e.g. `helmet.jem`, each piece can be varied separately e.g. `helmet.properties` (1.21.2+ ONLY!, for now)
- added fallback properties support to match OptiFine behaviour. e.g. `drowned_outer.jem` will vary with `drowned.properties` if `drowned_outer.properties` doesn't exist. (The latter is only possible via EMF as OptiFine will only use `drowned.properties`)
- reduced log spam for certain loading warnings
- prevented some unimportant exceptions from triggering the load error warning toast
- math functions that allow string inputs can now use `\` to escape the `,`, `(`, `)`, & `\` characters, such as when needing a `,` in one of the inputs for `nbt()`. e.g. `nbt(Test,text='this\, that')`
- fixed whitespace characters in functions that allow string inputs
- fixed all minecart variants only using the `minecart` model in 1.21.2+, they now correctly use it as a fallback only
- fixed boat and minecart variant animation parameters
- fixed layer models not rendering in 1.21.2+
- fixed an issue with chest models in 1.21.2+
- fixed some config translation logic
- fixed `move_forward` & `move_strafing` breaking for other entities in multiplayer

- added `helmet`, `chestplate`, `leggings`, and `boots` partial armor model support. e.g. `helmet.jem`, each piece can be varied separately e.g. `helmet.properties` (1.21.2+ ONLY!, for now)
- added fallback properties support to match OptiFine behaviour. e.g. `drowned_outer.jem` will vary with `drowned.properties` if `drowned_outer.properties` doesn't exist. (The latter is only possible via EMF as OptiFine will only use `drowned.properties`)
- reduced log spam for certain loading warnings
- prevented some unimportant exceptions from triggering the load error warning toast
- math functions that allow string inputs can now use `\` to escape the `,`, `(`, `)`, & `\` characters, such as when needing a `,` in one of the inputs for `nbt()`. e.g. `nbt(Test,text='this\, that')`
- fixed whitespace characters in functions that allow string inputs
- fixed all minecart variants only using the `minecart` model in 1.21.2+, they now correctly use it as a fallback only
- fixed boat and minecart variant animation parameters
- fixed layer models not rendering in 1.21.2+
- fixed an issue with chest models in 1.21.2+
- fixed some config translation logic
- fixed `move_forward` & `move_strafing` breaking for other entities in multiplayer

- added `helmet`, `chestplate`, `leggings`, and `boots` partial armor model support. e.g. `helmet.jem`, each piece can be varied separately e.g. `helmet.properties` (1.21.2+ ONLY!, for now)
- added fallback properties support to match OptiFine behaviour. e.g. `drowned_outer.jem` will vary with `drowned.properties` if `drowned_outer.properties` doesn't exist. (The latter is only possible via EMF as OptiFine will only use `drowned.properties`)
- reduced log spam for certain loading warnings
- prevented some unimportant exceptions from triggering the load error warning toast
- math functions that allow string inputs can now use `\` to escape the `,`, `(`, `)`, & `\` characters, such as when needing a `,` in one of the inputs for `nbt()`. e.g. `nbt(Test,text='this\, that')`
- fixed whitespace characters in functions that allow string inputs
- fixed all minecart variants only using the `minecart` model in 1.21.2+, they now correctly use it as a fallback only
- fixed boat and minecart variant animation parameters
- fixed layer models not rendering in 1.21.2+
- fixed an issue with chest models in 1.21.2+
- fixed some config translation logic
- fixed `move_forward` & `move_strafing` breaking for other entities in multiplayer

- added `helmet`, `chestplate`, `leggings`, and `boots` partial armor model support. e.g. `helmet.jem`, each piece can be varied separately e.g. `helmet.properties` (1.21.2+ ONLY!, for now)
- added fallback properties support to match OptiFine behaviour. e.g. `drowned_outer.jem` will vary with `drowned.properties` if `drowned_outer.properties` doesn't exist. (The latter is only possible via EMF as OptiFine will only use `drowned.properties`)
- reduced log spam for certain loading warnings
- prevented some unimportant exceptions from triggering the load error warning toast
- math functions that allow string inputs can now use `\` to escape the `,`, `(`, `)`, & `\` characters, such as when needing a `,` in one of the inputs for `nbt()`. e.g. `nbt(Test,text='this\, that')`
- fixed whitespace characters in functions that allow string inputs
- fixed all minecart variants only using the `minecart` model in 1.21.2+, they now correctly use it as a fallback only
- fixed boat and minecart variant animation parameters
- fixed layer models not rendering in 1.21.2+
- fixed an issue with chest models in 1.21.2+
- fixed some config translation logic
- fixed `move_forward` & `move_strafing` breaking for other entities in multiplayer

- updated Forge and NeoForge to 1.21.4
- added a toast message when the reload encountered EMF errors (can be disabled in config)
- added config options to re-log many exceptions encountered during EMF loading, even some not normally logged due to config settings
- fixed `spectral_arrow` model breaking in 1.21.3
- limited `time`, `frame_counter`, `id`, and a few other variables to 27720
- fixed single block chest models not loading properly in 1.21.2+

- updated Forge and NeoForge to 1.21.4
- added a toast message when the reload encountered EMF errors (can be disabled in config)
- added config options to re-log many exceptions encountered during EMF loading, even some not normally logged due to config settings
- fixed `spectral_arrow` model breaking in 1.21.3
- limited `time`, `frame_counter`, `id`, and a few other variables to 27720
- fixed single block chest models not loading properly in 1.21.2+

- updated Forge and NeoForge to 1.21.4
- added a toast message when the reload encountered EMF errors (can be disabled in config)
- added config options to re-log many exceptions encountered during EMF loading, even some not normally logged due to config settings
- fixed `spectral_arrow` model breaking in 1.21.3
- limited `time`, `frame_counter`, `id`, and a few other variables to 27720
- fixed single block chest models not loading properly in 1.21.2+

[2.3.0]
- the remaining 1.21.3 changes should be fairly "stable" now and are unlikely to have significant changes going forwards, likely only semantic ones as OptiFine develops
- improved how EMF exports default models, they will now look much prettier in blockbench due to various semantic only changes
- fixed baby and other model scaling issues in previous 1.21.3 builds, baby models with certain custom animations, using the old offsets, are still broken and need pack makers to update their packs
- updated model & part names, see the `emf > models > all models` settings in game for the most detailed and accurate list of all model & part names
- dragon - "neck1 - neck5" and "tail1 - tail12", replacing "spine"
- bogged - same as skeleton + "mushrooms" part
- bogged_outer - same as stray_outer
- armadillo - see in-game model settings screen for parts list
- end_crystal - "inner_glass" and "outer_glass" replacing "glass"
- arrow - "back, cross_1, cross_2"
- spectral_arrow - "back, cross_1, cross_2"
- bee_stinger - "cross_1, cross_2"
- player_cape - "cape"
- player_ears - "left_ear" and "right_ear"
- player_slim - will now fallback to player.jem if not present
- salmon_large - falls back to "salmon"
- salmon_small - falls back to "salmon"
- breeze_wind_charge - same as "wind_charge"
- boat models now use the naming convention <wood_type>_<boat_type> e.g. "oak_boat" and "oak_chest_boat" and fallback to the old model names e.g. "boat" and "chest_boat"
- raft and boat models no longer contain the "water_patch" part themselves, this is now a separate model
- water_patch - "water_patch" also supports boat type variants e.g. "oak_water_patch"
- minecraft models now all fallback to the default minecart model
- chest_large - has been split into "chest_left" and "chest_right" models, same for trapped_chests. EMF will retain legacy support for the old model name for the time being
- wall_sign - falls back to the "sign" model and doesn't have the "stick" part
- sign, wall_sign, and hanging_sign - all support wood types in the model name e.g. "oak_sign" and "oak_wall_sign" that will fall back to the generic model
- there may be several more minor changes, see the in-game `emf > models > all models` settings screen for the most accurate and complete list
- added legacy model fallbacks `book`, `evocation_illager`, `evocation_fangs`, and `vindication_illager`
- many other minor tweaks and fixes

[2.3.0]
- the remaining 1.21.3 changes should be fairly "stable" now and are unlikely to have significant changes going forwards, likely only semantic ones as OptiFine develops
- improved how EMF exports default models, they will now look much prettier in blockbench due to various semantic only changes
- fixed baby and other model scaling issues in previous 1.21.3 builds, baby models with certain custom animations, using the old offsets, are still broken and need pack makers to update their packs
- updated model & part names, see the `emf > models > all models` settings in game for the most detailed and accurate list of all model & part names
- dragon - "neck1 - neck5" and "tail1 - tail12", replacing "spine"
- bogged - same as skeleton + "mushrooms" part
- bogged_outer - same as stray_outer
- armadillo - see in-game model settings screen for parts list
- end_crystal - "inner_glass" and "outer_glass" replacing "glass"
- arrow - "back, cross_1, cross_2"
- spectral_arrow - "back, cross_1, cross_2"
- bee_stinger - "cross_1, cross_2"
- player_cape - "cape"
- player_ears - "left_ear" and "right_ear"
- player_slim - will now fallback to player.jem if not present
- salmon_large - falls back to "salmon"
- salmon_small - falls back to "salmon"
- breeze_wind_charge - same as "wind_charge"
- boat models now use the naming convention <wood_type>_<boat_type> e.g. "oak_boat" and "oak_chest_boat" and fallback to the old model names e.g. "boat" and "chest_boat"
- raft and boat models no longer contain the "water_patch" part themselves, this is now a separate model
- water_patch - "water_patch" also supports boat type variants e.g. "oak_water_patch"
- minecraft models now all fallback to the default minecart model
- chest_large - has been split into "chest_left" and "chest_right" models, same for trapped_chests. EMF will retain legacy support for the old model name for the time being
- wall_sign - falls back to the "sign" model and doesn't have the "stick" part
- sign, wall_sign, and hanging_sign - all support wood types in the model name e.g. "oak_sign" and "oak_wall_sign" that will fall back to the generic model
- there may be several more minor changes, see the in-game `emf > models > all models` settings screen for the most accurate and complete list
- added legacy model fallbacks `book`, `evocation_illager`, `evocation_fangs`, and `vindication_illager`
- many other minor tweaks and fixes

[2.3.0]
- the remaining 1.21.3 changes should be fairly "stable" now and are unlikely to have significant changes going forwards, likely only semantic ones as OptiFine develops
- improved how EMF exports default models, they will now look much prettier in blockbench due to various semantic only changes
- fixed baby and other model scaling issues in previous 1.21.3 builds, baby models with certain custom animations, using the old offsets, are still broken and need pack makers to update their packs
- updated model & part names, see the `emf > models > all models` settings in game for the most detailed and accurate list of all model & part names
- dragon - "neck1 - neck5" and "tail1 - tail12", replacing "spine"
- bogged - same as skeleton + "mushrooms" part
- bogged_outer - same as stray_outer
- armadillo - see in-game model settings screen for parts list
- end_crystal - "inner_glass" and "outer_glass" replacing "glass"
- arrow - "back, cross_1, cross_2"
- spectral_arrow - "back, cross_1, cross_2"
- bee_stinger - "cross_1, cross_2"
- player_cape - "cape"
- player_ears - "left_ear" and "right_ear"
- player_slim - will now fallback to player.jem if not present
- salmon_large - falls back to "salmon"
- salmon_small - falls back to "salmon"
- breeze_wind_charge - same as "wind_charge"
- boat models now use the naming convention <wood_type>_<boat_type> e.g. "oak_boat" and "oak_chest_boat" and fallback to the old model names e.g. "boat" and "chest_boat"
- raft and boat models no longer contain the "water_patch" part themselves, this is now a separate model
- water_patch - "water_patch" also supports boat type variants e.g. "oak_water_patch"
- minecraft models now all fallback to the default minecart model
- chest_large - has been split into "chest_left" and "chest_right" models, same for trapped_chests. EMF will retain legacy support for the old model name for the time being
- wall_sign - falls back to the "sign" model and doesn't have the "stick" part
- sign, wall_sign, and hanging_sign - all support wood types in the model name e.g. "oak_sign" and "oak_wall_sign" that will fall back to the generic model
- there may be several more minor changes, see the in-game `emf > models > all models` settings screen for the most accurate and complete list
- added legacy model fallbacks `book`, `evocation_illager`, `evocation_fangs`, and `vindication_illager`
- many other minor tweaks and fixes

[2.2.7]
- updated to 1.21.2+

1.21.2+ has a large amount of internal entity rendering changes many of these changes will affect models, see my discord for a write-up I have done on the changes to expect and their impacts
or this link

https://github.com/Traben-0/Entity_Model_Features/blob/master/.github/1.21.2%2B%20%20changes.md


- removed the setting that would attempt to revert emf models changed by other mods, as it had a lot of overhead with new changes
- the `creaking_transient` entity variant will try and use `creaking_transient.jem` first and will use `creaking.jem` otherwise
- different boat types now use the format <wood_type>_<boat_type>.jem e.g. `oak_boat.jem`, `oak_chest_boat.jem`, and the rafts `bamboo_raft.jem`, `bamboo_chest_raft.jem`
this differs from EMF previously using their vanilla model id such as `boat/oak.jem`
- `baby_inner_armor.jem` and `baby_outer_armor.jem` have been added as fallbacks for the baby armor models
- `player_cape.jem` and `arrow.jem` have completely different implementations now, due to inclusion in vanilla rendering
- `wind_charge` part names updated to reflect changes in OptiFine
- the OptiFine limitation setting to always require a base model for variation has been set as disabled by default, as the limitation is inconsistent in OptiFine and has affected several packs working normally in OptiFine (the config name has changed so this will automatically update for you)

[2.2.7]
- updated to 1.21.2+

1.21.2+ has a large amount of internal entity rendering changes many of these changes will affect models, see my discord for a write-up I have done on the changes to expect and their impacts
or this link

https://github.com/Traben-0/Entity_Model_Features/blob/master/.github/1.21.2%2B%20%20changes.md


- removed the setting that would attempt to revert emf models changed by other mods, as it had a lot of overhead with new changes
- the `creaking_transient` entity variant will try and use `creaking_transient.jem` first and will use `creaking.jem` otherwise
- different boat types now use the format <wood_type>_<boat_type>.jem e.g. `oak_boat.jem`, `oak_chest_boat.jem`, and the rafts `bamboo_raft.jem`, `bamboo_chest_raft.jem`
this differs from EMF previously using their vanilla model id such as `boat/oak.jem`
- `baby_inner_armor.jem` and `baby_outer_armor.jem` have been added as fallbacks for the baby armor models
- `player_cape.jem` and `arrow.jem` have completely different implementations now, due to inclusion in vanilla rendering
- `wind_charge` part names updated to reflect changes in OptiFine
- the OptiFine limitation setting to always require a base model for variation has been set as disabled by default, as the limitation is inconsistent in OptiFine and has affected several packs working normally in OptiFine (the config name has changed so this will automatically update for you)

- fixed model textures prefixed with `./` & `~/` breaking from a recent change
- expanded the EMF API:
- added `int getCurrentEMFVariantOfModel(EntityModel<?>)` returns the current variant of the model or -1 if the model is not a custom EMF model.
- added `boolean isModelAnimatedByEMF(EntityModel<?>)` returns true if the model has custom EMF animations.
- added `boolean isModelCustomizedByEMF(EntityModel<?>)` returns true if the model is a custom EMF model.
- added `boolean isModelPartCustomToEMF(ModelPart)` returns true if this model part is an extraneous part added by EMF, and does not represent any actual normal vanilla parts.
- added `boolean isModelPartAnimatedByEMF(ModelPart)` returns true if this model part itself is animated by EMF, e.g `"modePart.rx":"sin(age)"`.
- fixed some per-entity model override settings from not applying correctly in game, such as modifying render mode per entity type.
- moved the box face UV height/width are zero warnings to only appear when model creation logging is enabled, as it got far too spammy with the many packs that don't care about this.

- fixed model textures prefixed with `./` & `~/` breaking from a recent change
- expanded the EMF API:
- added `int getCurrentEMFVariantOfModel(EntityModel<?>)` returns the current variant of the model or -1 if the model is not a custom EMF model.
- added `boolean isModelAnimatedByEMF(EntityModel<?>)` returns true if the model has custom EMF animations.
- added `boolean isModelCustomizedByEMF(EntityModel<?>)` returns true if the model is a custom EMF model.
- added `boolean isModelPartCustomToEMF(ModelPart)` returns true if this model part is an extraneous part added by EMF, and does not represent any actual normal vanilla parts.
- added `boolean isModelPartAnimatedByEMF(ModelPart)` returns true if this model part itself is animated by EMF, e.g `"modePart.rx":"sin(age)"`.
- fixed some per-entity model override settings from not applying correctly in game, such as modifying render mode per entity type.
- moved the box face UV height/width are zero warnings to only appear when model creation logging is enabled, as it got far too spammy with the many packs that don't care about this.

- fixed model textures prefixed with `./` & `~/` breaking from a recent change
- expanded the EMF API:
- added `int getCurrentEMFVariantOfModel(EntityModel<?>)` returns the current variant of the model or -1 if the model is not a custom EMF model.
- added `boolean isModelAnimatedByEMF(EntityModel<?>)` returns true if the model has custom EMF animations.
- added `boolean isModelCustomizedByEMF(EntityModel<?>)` returns true if the model is a custom EMF model.
- added `boolean isModelPartCustomToEMF(ModelPart)` returns true if this model part is an extraneous part added by EMF, and does not represent any actual normal vanilla parts.
- added `boolean isModelPartAnimatedByEMF(ModelPart)` returns true if this model part itself is animated by EMF, e.g `"modePart.rx":"sin(age)"`.
- fixed some per-entity model override settings from not applying correctly in game, such as modifying render mode per entity type.
- moved the box face UV height/width are zero warnings to only appear when model creation logging is enabled, as it got far too spammy with the many packs that don't care about this.

- fixed model textures prefixed with `./` & `~/` breaking from a recent change
- expanded the EMF API:
- added `int getCurrentEMFVariantOfModel(EntityModel<?>)` returns the current variant of the model or -1 if the model is not a custom EMF model.
- added `boolean isModelAnimatedByEMF(EntityModel<?>)` returns true if the model has custom EMF animations.
- added `boolean isModelCustomizedByEMF(EntityModel<?>)` returns true if the model is a custom EMF model.
- added `boolean isModelPartCustomToEMF(ModelPart)` returns true if this model part is an extraneous part added by EMF, and does not represent any actual normal vanilla parts.
- added `boolean isModelPartAnimatedByEMF(ModelPart)` returns true if this model part itself is animated by EMF, e.g `"modePart.rx":"sin(age)"`.
- fixed some per-entity model override settings from not applying correctly in game, such as modifying render mode per entity type.
- moved the box face UV height/width are zero warnings to only appear when model creation logging is enabled, as it got far too spammy with the many packs that don't care about this.

- fixed model textures prefixed with `./` & `~/` breaking from a recent change
- expanded the EMF API:
- added `int getCurrentEMFVariantOfModel(EntityModel<?>)` returns the current variant of the model or -1 if the model is not a custom EMF model.
- added `boolean isModelAnimatedByEMF(EntityModel<?>)` returns true if the model has custom EMF animations.
- added `boolean isModelCustomizedByEMF(EntityModel<?>)` returns true if the model is a custom EMF model.
- added `boolean isModelPartCustomToEMF(ModelPart)` returns true if this model part is an extraneous part added by EMF, and does not represent any actual normal vanilla parts.
- added `boolean isModelPartAnimatedByEMF(ModelPart)` returns true if this model part itself is animated by EMF, e.g `"modePart.rx":"sin(age)"`.
- fixed some per-entity model override settings from not applying correctly in game, such as modifying render mode per entity type.
- moved the box face UV height/width are zero warnings to only appear when model creation logging is enabled, as it got far too spammy with the many packs that don't care about this.

- fixed model textures prefixed with `./` & `~/` breaking from a recent change
- expanded the EMF API:
- added `int getCurrentEMFVariantOfModel(EntityModel<?>)` returns the current variant of the model or -1 if the model is not a custom EMF model.
- added `boolean isModelAnimatedByEMF(EntityModel<?>)` returns true if the model has custom EMF animations.
- added `boolean isModelCustomizedByEMF(EntityModel<?>)` returns true if the model is a custom EMF model.
- added `boolean isModelPartCustomToEMF(ModelPart)` returns true if this model part is an extraneous part added by EMF, and does not represent any actual normal vanilla parts.
- added `boolean isModelPartAnimatedByEMF(ModelPart)` returns true if this model part itself is animated by EMF, e.g `"modePart.rx":"sin(age)"`.
- fixed some per-entity model override settings from not applying correctly in game, such as modifying render mode per entity type.
- moved the box face UV height/width are zero warnings to only appear when model creation logging is enabled, as it got far too spammy with the many packs that don't care about this.

- fixed model textures prefixed with `./` & `~/` breaking from a recent change
- expanded the EMF API:
- added `int getCurrentEMFVariantOfModel(EntityModel<?>)` returns the current variant of the model or -1 if the model is not a custom EMF model.
- added `boolean isModelAnimatedByEMF(EntityModel<?>)` returns true if the model has custom EMF animations.
- added `boolean isModelCustomizedByEMF(EntityModel<?>)` returns true if the model is a custom EMF model.
- added `boolean isModelPartCustomToEMF(ModelPart)` returns true if this model part is an extraneous part added by EMF, and does not represent any actual normal vanilla parts.
- added `boolean isModelPartAnimatedByEMF(ModelPart)` returns true if this model part itself is animated by EMF, e.g `"modePart.rx":"sin(age)"`.
- fixed some per-entity model override settings from not applying correctly in game, such as modifying render mode per entity type.
- moved the box face UV height/width are zero warnings to only appear when model creation logging is enabled, as it got far too spammy with the many packs that don't care about this.

- fixed model textures prefixed with `./` & `~/` breaking from a recent change
- expanded the EMF API:
- added `int getCurrentEMFVariantOfModel(EntityModel<?>)` returns the current variant of the model or -1 if the model is not a custom EMF model.
- added `boolean isModelAnimatedByEMF(EntityModel<?>)` returns true if the model has custom EMF animations.
- added `boolean isModelCustomizedByEMF(EntityModel<?>)` returns true if the model is a custom EMF model.
- added `boolean isModelPartCustomToEMF(ModelPart)` returns true if this model part is an extraneous part added by EMF, and does not represent any actual normal vanilla parts.
- added `boolean isModelPartAnimatedByEMF(ModelPart)` returns true if this model part itself is animated by EMF, e.g `"modePart.rx":"sin(age)"`.
- fixed some per-entity model override settings from not applying correctly in game, such as modifying render mode per entity type.
- moved the box face UV height/width are zero warnings to only appear when model creation logging is enabled, as it got far too spammy with the many packs that don't care about this.

- fixed model textures prefixed with `./` & `~/` breaking from a recent change
- expanded the EMF API:
- added `int getCurrentEMFVariantOfModel(EntityModel<?>)` returns the current variant of the model or -1 if the model is not a custom EMF model.
- added `boolean isModelAnimatedByEMF(EntityModel<?>)` returns true if the model has custom EMF animations.
- added `boolean isModelCustomizedByEMF(EntityModel<?>)` returns true if the model is a custom EMF model.
- added `boolean isModelPartCustomToEMF(ModelPart)` returns true if this model part is an extraneous part added by EMF, and does not represent any actual normal vanilla parts.
- added `boolean isModelPartAnimatedByEMF(ModelPart)` returns true if this model part itself is animated by EMF, e.g `"modePart.rx":"sin(age)"`.
- fixed some per-entity model override settings from not applying correctly in game, such as modifying render mode per entity type.
- moved the box face UV height/width are zero warnings to only appear when model creation logging is enabled, as it got far too spammy with the many packs that don't care about this.

- fixed model textures prefixed with `./` & `~/` breaking from a recent change
- expanded the EMF API:
- added `int getCurrentEMFVariantOfModel(EntityModel<?>)` returns the current variant of the model or -1 if the model is not a custom EMF model.
- added `boolean isModelAnimatedByEMF(EntityModel<?>)` returns true if the model has custom EMF animations.
- added `boolean isModelCustomizedByEMF(EntityModel<?>)` returns true if the model is a custom EMF model.
- added `boolean isModelPartCustomToEMF(ModelPart)` returns true if this model part is an extraneous part added by EMF, and does not represent any actual normal vanilla parts.
- added `boolean isModelPartAnimatedByEMF(ModelPart)` returns true if this model part itself is animated by EMF, e.g `"modePart.rx":"sin(age)"`.
- fixed some per-entity model override settings from not applying correctly in game, such as modifying render mode per entity type.
- moved the box face UV height/width are zero warnings to only appear when model creation logging is enabled, as it got far too spammy with the many packs that don't care about this.

- fixed model textures prefixed with `./` & `~/` breaking from a recent change
- expanded the EMF API:
- added `int getCurrentEMFVariantOfModel(EntityModel<?>)` returns the current variant of the model or -1 if the model is not a custom EMF model.
- added `boolean isModelAnimatedByEMF(EntityModel<?>)` returns true if the model has custom EMF animations.
- added `boolean isModelCustomizedByEMF(EntityModel<?>)` returns true if the model is a custom EMF model.
- added `boolean isModelPartCustomToEMF(ModelPart)` returns true if this model part is an extraneous part added by EMF, and does not represent any actual normal vanilla parts.
- added `boolean isModelPartAnimatedByEMF(ModelPart)` returns true if this model part itself is animated by EMF, e.g `"modePart.rx":"sin(age)"`.
- fixed some per-entity model override settings from not applying correctly in game, such as modifying render mode per entity type.
- moved the box face UV height/width are zero warnings to only appear when model creation logging is enabled, as it got far too spammy with the many packs that don't care about this.

- fixed model textures prefixed with `./` & `~/` breaking from a recent change
- expanded the EMF API:
- added `int getCurrentEMFVariantOfModel(EntityModel<?>)` returns the current variant of the model or -1 if the model is not a custom EMF model.
- added `boolean isModelAnimatedByEMF(EntityModel<?>)` returns true if the model has custom EMF animations.
- added `boolean isModelCustomizedByEMF(EntityModel<?>)` returns true if the model is a custom EMF model.
- added `boolean isModelPartCustomToEMF(ModelPart)` returns true if this model part is an extraneous part added by EMF, and does not represent any actual normal vanilla parts.
- added `boolean isModelPartAnimatedByEMF(ModelPart)` returns true if this model part itself is animated by EMF, e.g `"modePart.rx":"sin(age)"`.
- fixed some per-entity model override settings from not applying correctly in game, such as modifying render mode per entity type.
- moved the box face UV height/width are zero warnings to only appear when model creation logging is enabled, as it got far too spammy with the many packs that don't care about this.

- fixed model textures prefixed with `./` & `~/` breaking from a recent change
- expanded the EMF API:
- added `int getCurrentEMFVariantOfModel(EntityModel<?>)` returns the current variant of the model or -1 if the model is not a custom EMF model.
- added `boolean isModelAnimatedByEMF(EntityModel<?>)` returns true if the model has custom EMF animations.
- added `boolean isModelCustomizedByEMF(EntityModel<?>)` returns true if the model is a custom EMF model.
- added `boolean isModelPartCustomToEMF(ModelPart)` returns true if this model part is an extraneous part added by EMF, and does not represent any actual normal vanilla parts.
- added `boolean isModelPartAnimatedByEMF(ModelPart)` returns true if this model part itself is animated by EMF, e.g `"modePart.rx":"sin(age)"`.
- fixed some per-entity model override settings from not applying correctly in game, such as modifying render mode per entity type.
- moved the box face UV height/width are zero warnings to only appear when model creation logging is enabled, as it got far too spammy with the many packs that don't care about this.

- fixed model textures prefixed with `./` & `~/` breaking from a recent change
- expanded the EMF API:
- added `int getCurrentEMFVariantOfModel(EntityModel<?>)` returns the current variant of the model or -1 if the model is not a custom EMF model.
- added `boolean isModelAnimatedByEMF(EntityModel<?>)` returns true if the model has custom EMF animations.
- added `boolean isModelCustomizedByEMF(EntityModel<?>)` returns true if the model is a custom EMF model.
- added `boolean isModelPartCustomToEMF(ModelPart)` returns true if this model part is an extraneous part added by EMF, and does not represent any actual normal vanilla parts.
- added `boolean isModelPartAnimatedByEMF(ModelPart)` returns true if this model part itself is animated by EMF, e.g `"modePart.rx":"sin(age)"`.
- fixed some per-entity model override settings from not applying correctly in game, such as modifying render mode per entity type.
- moved the box face UV height/width are zero warnings to only appear when model creation logging is enabled, as it got far too spammy with the many packs that don't care about this.

- fixed a crash when arrows render stuck inside a player with a custom model that replaced all their vanilla parts
- fixed arrows stuck inside players not following with the custom animations of the custom player model
- EMF now removes the `floor UVs` OptiFine parity setting in 1.21 and newer versions, as OptiFine now matches EMF's default behaviour.
- The warning for a cube having 0 UV width and height has been made more verbose, and will also be dependent on the `floor UVs` setting in earlier versions.

- fixed a crash when arrows render stuck inside a player with a custom model that replaced all their vanilla parts
- fixed arrows stuck inside players not following with the custom animations of the custom player model
- EMF now removes the `floor UVs` OptiFine parity setting in 1.21 and newer versions, as OptiFine now matches EMF's default behaviour.
- The warning for a cube having 0 UV width and height has been made more verbose, and will also be dependent on the `floor UVs` setting in earlier versions.

- fixed a crash when arrows render stuck inside a player with a custom model that replaced all their vanilla parts
- fixed arrows stuck inside players not following with the custom animations of the custom player model
- EMF now removes the `floor UVs` OptiFine parity setting in 1.21 and newer versions, as OptiFine now matches EMF's default behaviour.
- The warning for a cube having 0 UV width and height has been made more verbose, and will also be dependent on the `floor UVs` setting in earlier versions.

- fixed a crash when arrows render stuck inside a player with a custom model that replaced all their vanilla parts
- fixed arrows stuck inside players not following with the custom animations of the custom player model
- EMF now removes the `floor UVs` OptiFine parity setting in 1.21 and newer versions, as OptiFine now matches EMF's default behaviour.
- The warning for a cube having 0 UV width and height has been made more verbose, and will also be dependent on the `floor UVs` setting in earlier versions.

- fixed a crash when arrows render stuck inside a player with a custom model that replaced all their vanilla parts
- fixed arrows stuck inside players not following with the custom animations of the custom player model
- EMF now removes the `floor UVs` OptiFine parity setting in 1.21 and newer versions, as OptiFine now matches EMF's default behaviour.
- The warning for a cube having 0 UV width and height has been made more verbose, and will also be dependent on the `floor UVs` setting in earlier versions.

- fixed a crash when arrows render stuck inside a player with a custom model that replaced all their vanilla parts
- fixed arrows stuck inside players not following with the custom animations of the custom player model
- EMF now removes the `floor UVs` OptiFine parity setting in 1.21 and newer versions, as OptiFine now matches EMF's default behaviour.
- The warning for a cube having 0 UV width and height has been made more verbose, and will also be dependent on the `floor UVs` setting in earlier versions.

- fixed a crash when arrows render stuck inside a player with a custom model that replaced all their vanilla parts
- fixed arrows stuck inside players not following with the custom animations of the custom player model
- EMF now removes the `floor UVs` OptiFine parity setting in 1.21 and newer versions, as OptiFine now matches EMF's default behaviour.
- The warning for a cube having 0 UV width and height has been made more verbose, and will also be dependent on the `floor UVs` setting in earlier versions.

- fixed a crash when arrows render stuck inside a player with a custom model that replaced all their vanilla parts
- fixed arrows stuck inside players not following with the custom animations of the custom player model
- EMF now removes the `floor UVs` OptiFine parity setting in 1.21 and newer versions, as OptiFine now matches EMF's default behaviour.
- The warning for a cube having 0 UV width and height has been made more verbose, and will also be dependent on the `floor UVs` setting in earlier versions.

- fixed a crash when arrows render stuck inside a player with a custom model that replaced all their vanilla parts
- fixed arrows stuck inside players not following with the custom animations of the custom player model
- EMF now removes the `floor UVs` OptiFine parity setting in 1.21 and newer versions, as OptiFine now matches EMF's default behaviour.
- The warning for a cube having 0 UV width and height has been made more verbose, and will also be dependent on the `floor UVs` setting in earlier versions.

- fixed a crash when arrows render stuck inside a player with a custom model that replaced all their vanilla parts
- fixed arrows stuck inside players not following with the custom animations of the custom player model
- EMF now removes the `floor UVs` OptiFine parity setting in 1.21 and newer versions, as OptiFine now matches EMF's default behaviour.
- The warning for a cube having 0 UV width and height has been made more verbose, and will also be dependent on the `floor UVs` setting in earlier versions.

- fixed a crash when arrows render stuck inside a player with a custom model that replaced all their vanilla parts
- fixed arrows stuck inside players not following with the custom animations of the custom player model
- EMF now removes the `floor UVs` OptiFine parity setting in 1.21 and newer versions, as OptiFine now matches EMF's default behaviour.
- The warning for a cube having 0 UV width and height has been made more verbose, and will also be dependent on the `floor UVs` setting in earlier versions.

- fixed a crash when arrows render stuck inside a player with a custom model that replaced all their vanilla parts
- fixed arrows stuck inside players not following with the custom animations of the custom player model
- EMF now removes the `floor UVs` OptiFine parity setting in 1.21 and newer versions, as OptiFine now matches EMF's default behaviour.
- The warning for a cube having 0 UV width and height has been made more verbose, and will also be dependent on the `floor UVs` setting in earlier versions.

- fixed a crash when arrows render stuck inside a player with a custom model that replaced all their vanilla parts
- fixed arrows stuck inside players not following with the custom animations of the custom player model
- EMF now removes the `floor UVs` OptiFine parity setting in 1.21 and newer versions, as OptiFine now matches EMF's default behaviour.
- The warning for a cube having 0 UV width and height has been made more verbose, and will also be dependent on the `floor UVs` setting in earlier versions.

- fixed a crash when arrows render stuck inside a player with a custom model that replaced all their vanilla parts
- fixed arrows stuck inside players not following with the custom animations of the custom player model
- EMF now removes the `floor UVs` OptiFine parity setting in 1.21 and newer versions, as OptiFine now matches EMF's default behaviour.
- The warning for a cube having 0 UV width and height has been made more verbose, and will also be dependent on the `floor UVs` setting in earlier versions.

- fixed `rot_y` giving an incorrect value for specifically the client player model
- fixed the `part` keyword in animations not working correctly for OptiFine part names that differ from the vanilla ones
- fixed texture overrides breaking at the .jem level for most models, due to a broken redundancy optimization

- fixed `rot_y` giving an incorrect value for specifically the client player model
- fixed the `part` keyword in animations not working correctly for OptiFine part names that differ from the vanilla ones
- fixed texture overrides breaking at the .jem level for most models, due to a broken redundancy optimization

- fixed `rot_y` giving an incorrect value for specifically the client player model
- fixed the `part` keyword in animations not working correctly for OptiFine part names that differ from the vanilla ones
- fixed texture overrides breaking at the .jem level for most models, due to a broken redundancy optimization

- fixed `rot_y` giving an incorrect value for specifically the client player model
- fixed the `part` keyword in animations not working correctly for OptiFine part names that differ from the vanilla ones
- fixed texture overrides breaking at the .jem level for most models, due to a broken redundancy optimization

- fixed `rot_y` giving an incorrect value for specifically the client player model
- fixed the `part` keyword in animations not working correctly for OptiFine part names that differ from the vanilla ones
- fixed texture overrides breaking at the .jem level for most models, due to a broken redundancy optimization

- fixed `rot_y` giving an incorrect value for specifically the client player model
- fixed the `part` keyword in animations not working correctly for OptiFine part names that differ from the vanilla ones
- fixed texture overrides breaking at the .jem level for most models, due to a broken redundancy optimization

- fixed `rot_y` giving an incorrect value for specifically the client player model
- fixed the `part` keyword in animations not working correctly for OptiFine part names that differ from the vanilla ones
- fixed texture overrides breaking at the .jem level for most models, due to a broken redundancy optimization

- fixed `rot_y` giving an incorrect value for specifically the client player model
- fixed the `part` keyword in animations not working correctly for OptiFine part names that differ from the vanilla ones
- fixed texture overrides breaking at the .jem level for most models, due to a broken redundancy optimization

- fixed `rot_y` giving an incorrect value for specifically the client player model
- fixed the `part` keyword in animations not working correctly for OptiFine part names that differ from the vanilla ones
- fixed texture overrides breaking at the .jem level for most models, due to a broken redundancy optimization

- fixed `rot_y` giving an incorrect value for specifically the client player model
- fixed the `part` keyword in animations not working correctly for OptiFine part names that differ from the vanilla ones
- fixed texture overrides breaking at the .jem level for most models, due to a broken redundancy optimization

- fixed `rot_y` giving an incorrect value for specifically the client player model
- fixed the `part` keyword in animations not working correctly for OptiFine part names that differ from the vanilla ones
- fixed texture overrides breaking at the .jem level for most models, due to a broken redundancy optimization

- fixed `rot_y` giving an incorrect value for specifically the client player model
- fixed the `part` keyword in animations not working correctly for OptiFine part names that differ from the vanilla ones
- fixed texture overrides breaking at the .jem level for most models, due to a broken redundancy optimization

- fixed `rot_y` giving an incorrect value for specifically the client player model
- fixed the `part` keyword in animations not working correctly for OptiFine part names that differ from the vanilla ones
- fixed texture overrides breaking at the .jem level for most models, due to a broken redundancy optimization

- fixed `rot_y` giving an incorrect value for specifically the client player model
- fixed the `part` keyword in animations not working correctly for OptiFine part names that differ from the vanilla ones
- fixed texture overrides breaking at the .jem level for most models, due to a broken redundancy optimization

- added an optifine cem syntax limitation parity setting
- added a parity setting to enforce custom UV value flooring in boxes like OptiFine does
- added support for referencing `part` directly in animations such as `this` already does
- added more detailed validation warnings to box uv co-ordinates as well as fleshing out validation error messages to inform users of the exact issue source
- added `frame_counter` variable from the latest OptiFine
- added `wolf_collar` to the model list
- made `frame_time` match OptiFine's pausing and tick freeze behaviour
- fixed modded block entity models incorrectly including the namespace in the model file name when it should not e.g. looking for `optifine/cem/mod:model.jem` instead of `mod:optifine/cem/model.jem`
- fixed models with variants not resetting their initial state correctly on first load until at least 1 variation occurs naturally

- added an optifine cem syntax limitation parity setting
- added a parity setting to enforce custom UV value flooring in boxes like OptiFine does
- added support for referencing `part` directly in animations such as `this` already does
- added more detailed validation warnings to box uv co-ordinates as well as fleshing out validation error messages to inform users of the exact issue source
- added `frame_counter` variable from the latest OptiFine
- added `wolf_collar` to the model list
- made `frame_time` match OptiFine's pausing and tick freeze behaviour
- fixed modded block entity models incorrectly including the namespace in the model file name when it should not e.g. looking for `optifine/cem/mod:model.jem` instead of `mod:optifine/cem/model.jem`
- fixed models with variants not resetting their initial state correctly on first load until at least 1 variation occurs naturally

- added an optifine cem syntax limitation parity setting
- added a parity setting to enforce custom UV value flooring in boxes like OptiFine does
- added support for referencing `part` directly in animations such as `this` already does
- added more detailed validation warnings to box uv co-ordinates as well as fleshing out validation error messages to inform users of the exact issue source
- added `frame_counter` variable from the latest OptiFine
- added `wolf_collar` to the model list
- made `frame_time` match OptiFine's pausing and tick freeze behaviour
- fixed modded block entity models incorrectly including the namespace in the model file name when it should not e.g. looking for `optifine/cem/mod:model.jem` instead of `mod:optifine/cem/model.jem`
- fixed models with variants not resetting their initial state correctly on first load until at least 1 variation occurs naturally

- added an optifine cem syntax limitation parity setting
- added a parity setting to enforce custom UV value flooring in boxes like OptiFine does
- added support for referencing `part` directly in animations such as `this` already does
- added more detailed validation warnings to box uv co-ordinates as well as fleshing out validation error messages to inform users of the exact issue source
- added `frame_counter` variable from the latest OptiFine
- added `wolf_collar` to the model list
- made `frame_time` match OptiFine's pausing and tick freeze behaviour
- fixed modded block entity models incorrectly including the namespace in the model file name when it should not e.g. looking for `optifine/cem/mod:model.jem` instead of `mod:optifine/cem/model.jem`
- fixed models with variants not resetting their initial state correctly on first load until at least 1 variation occurs naturally

- added an optifine cem syntax limitation parity setting
- added a parity setting to enforce custom UV value flooring in boxes like OptiFine does
- added support for referencing `part` directly in animations such as `this` already does
- added more detailed validation warnings to box uv co-ordinates as well as fleshing out validation error messages to inform users of the exact issue source
- added `frame_counter` variable from the latest OptiFine
- added `wolf_collar` to the model list
- made `frame_time` match OptiFine's pausing and tick freeze behaviour
- fixed modded block entity models incorrectly including the namespace in the model file name when it should not e.g. looking for `optifine/cem/mod:model.jem` instead of `mod:optifine/cem/model.jem`
- fixed models with variants not resetting their initial state correctly on first load until at least 1 variation occurs naturally

- added an optifine cem syntax limitation parity setting
- added a parity setting to enforce custom UV value flooring in boxes like OptiFine does
- added support for referencing `part` directly in animations such as `this` already does
- added more detailed validation warnings to box uv co-ordinates as well as fleshing out validation error messages to inform users of the exact issue source
- added `frame_counter` variable from the latest OptiFine
- added `wolf_collar` to the model list
- made `frame_time` match OptiFine's pausing and tick freeze behaviour
- fixed modded block entity models incorrectly including the namespace in the model file name when it should not e.g. looking for `optifine/cem/mod:model.jem` instead of `mod:optifine/cem/model.jem`
- fixed models with variants not resetting their initial state correctly on first load until at least 1 variation occurs naturally

- added an optifine cem syntax limitation parity setting
- added a parity setting to enforce custom UV value flooring in boxes like OptiFine does
- added support for referencing `part` directly in animations such as `this` already does
- added more detailed validation warnings to box uv co-ordinates as well as fleshing out validation error messages to inform users of the exact issue source
- added `frame_counter` variable from the latest OptiFine
- added `wolf_collar` to the model list
- made `frame_time` match OptiFine's pausing and tick freeze behaviour
- fixed modded block entity models incorrectly including the namespace in the model file name when it should not e.g. looking for `optifine/cem/mod:model.jem` instead of `mod:optifine/cem/model.jem`
- fixed models with variants not resetting their initial state correctly on first load until at least 1 variation occurs naturally

- added an optifine cem syntax limitation parity setting
- added a parity setting to enforce custom UV value flooring in boxes like OptiFine does
- added support for referencing `part` directly in animations such as `this` already does
- added more detailed validation warnings to box uv co-ordinates as well as fleshing out validation error messages to inform users of the exact issue source
- added `frame_counter` variable from the latest OptiFine
- added `wolf_collar` to the model list
- made `frame_time` match OptiFine's pausing and tick freeze behaviour
- fixed modded block entity models incorrectly including the namespace in the model file name when it should not e.g. looking for `optifine/cem/mod:model.jem` instead of `mod:optifine/cem/model.jem`
- fixed models with variants not resetting their initial state correctly on first load until at least 1 variation occurs naturally

- added an optifine cem syntax limitation parity setting
- added a parity setting to enforce custom UV value flooring in boxes like OptiFine does
- added support for referencing `part` directly in animations such as `this` already does
- added more detailed validation warnings to box uv co-ordinates as well as fleshing out validation error messages to inform users of the exact issue source
- added `frame_counter` variable from the latest OptiFine
- added `wolf_collar` to the model list
- made `frame_time` match OptiFine's pausing and tick freeze behaviour
- fixed modded block entity models incorrectly including the namespace in the model file name when it should not e.g. looking for `optifine/cem/mod:model.jem` instead of `mod:optifine/cem/model.jem`
- fixed models with variants not resetting their initial state correctly on first load until at least 1 variation occurs naturally

- added an optifine cem syntax limitation parity setting
- added a parity setting to enforce custom UV value flooring in boxes like OptiFine does
- added support for referencing `part` directly in animations such as `this` already does
- added more detailed validation warnings to box uv co-ordinates as well as fleshing out validation error messages to inform users of the exact issue source
- added `frame_counter` variable from the latest OptiFine
- added `wolf_collar` to the model list
- made `frame_time` match OptiFine's pausing and tick freeze behaviour
- fixed modded block entity models incorrectly including the namespace in the model file name when it should not e.g. looking for `optifine/cem/mod:model.jem` instead of `mod:optifine/cem/model.jem`
- fixed models with variants not resetting their initial state correctly on first load until at least 1 variation occurs naturally

- added an optifine cem syntax limitation parity setting
- added a parity setting to enforce custom UV value flooring in boxes like OptiFine does
- added support for referencing `part` directly in animations such as `this` already does
- added more detailed validation warnings to box uv co-ordinates as well as fleshing out validation error messages to inform users of the exact issue source
- added `frame_counter` variable from the latest OptiFine
- added `wolf_collar` to the model list
- made `frame_time` match OptiFine's pausing and tick freeze behaviour
- fixed modded block entity models incorrectly including the namespace in the model file name when it should not e.g. looking for `optifine/cem/mod:model.jem` instead of `mod:optifine/cem/model.jem`
- fixed models with variants not resetting their initial state correctly on first load until at least 1 variation occurs naturally

- added an optifine cem syntax limitation parity setting
- added a parity setting to enforce custom UV value flooring in boxes like OptiFine does
- added support for referencing `part` directly in animations such as `this` already does
- added more detailed validation warnings to box uv co-ordinates as well as fleshing out validation error messages to inform users of the exact issue source
- added `frame_counter` variable from the latest OptiFine
- added `wolf_collar` to the model list
- made `frame_time` match OptiFine's pausing and tick freeze behaviour
- fixed modded block entity models incorrectly including the namespace in the model file name when it should not e.g. looking for `optifine/cem/mod:model.jem` instead of `mod:optifine/cem/model.jem`
- fixed models with variants not resetting their initial state correctly on first load until at least 1 variation occurs naturally

- added an optifine cem syntax limitation parity setting
- added a parity setting to enforce custom UV value flooring in boxes like OptiFine does
- added support for referencing `part` directly in animations such as `this` already does
- added more detailed validation warnings to box uv co-ordinates as well as fleshing out validation error messages to inform users of the exact issue source
- added `frame_counter` variable from the latest OptiFine
- added `wolf_collar` to the model list
- made `frame_time` match OptiFine's pausing and tick freeze behaviour
- fixed modded block entity models incorrectly including the namespace in the model file name when it should not e.g. looking for `optifine/cem/mod:model.jem` instead of `mod:optifine/cem/model.jem`
- fixed models with variants not resetting their initial state correctly on first load until at least 1 variation occurs naturally

- added an optifine cem syntax limitation parity setting
- added a parity setting to enforce custom UV value flooring in boxes like OptiFine does
- added support for referencing `part` directly in animations such as `this` already does
- added more detailed validation warnings to box uv co-ordinates as well as fleshing out validation error messages to inform users of the exact issue source
- added `frame_counter` variable from the latest OptiFine
- added `wolf_collar` to the model list
- made `frame_time` match OptiFine's pausing and tick freeze behaviour
- fixed modded block entity models incorrectly including the namespace in the model file name when it should not e.g. looking for `optifine/cem/mod:model.jem` instead of `mod:optifine/cem/model.jem`
- fixed models with variants not resetting their initial state correctly on first load until at least 1 variation occurs naturally

- now requires ETF 6.2.1 or newer
- fixed a model setup error that would break villager and warden, clothing and glowing textures with custom models that declared textures
- is_hover now respects the players current block interaction range for block entities
- id variable now matches OptiFine's value exactly
- reworked the player_cape.jem implementation to be more mod compatible, e.g. `wavey capes` mod can now correctly overwrite it & essentials works with it now
- swapped subfolder load priority for models. `optifine/cem/skeleton/skeleton.jem` now loads before `optifine/cem/skeleton.jem` matching optifine behaviour
- added an OptiFine compat setting to require submodel folders to have variants, e.g. `optifine/cem/skeleton/skeleton.jem` will not load without a `optifine/cem/skeleton/skeleton2.jem` or a valid .properties file.
- model exports no longer print rotation float values as doubles
- model exports now also log all box values for exported and non-exported parts
- fixed texture overrides not applying to `attach=true` or vanilla parts
- fixed animations breaking when the same part transform or variable is declared / updated more than once over all the animation entries
- added tickdelta to the death time variable *(fixes jittering in packs like skeleton death physics)*
- fixed not all instances of `this` being correctly resolved in animation math
- added spelling correction warnings for frequently misspelled variables like `is_aggressive`
- variables not being found now log as errors rather than warnings and will now correctly default to false for unknown booleans

- now requires ETF 6.2.1 or newer
- fixed a model setup error that would break villager and warden, clothing and glowing textures with custom models that declared textures
- is_hover now respects the players current block interaction range for block entities
- id variable now matches OptiFine's value exactly
- reworked the player_cape.jem implementation to be more mod compatible, e.g. `wavey capes` mod can now correctly overwrite it & essentials works with it now
- swapped subfolder load priority for models. `optifine/cem/skeleton/skeleton.jem` now loads before `optifine/cem/skeleton.jem` matching optifine behaviour
- added an OptiFine compat setting to require submodel folders to have variants, e.g. `optifine/cem/skeleton/skeleton.jem` will not load without a `optifine/cem/skeleton/skeleton2.jem` or a valid .properties file.
- model exports no longer print rotation float values as doubles
- model exports now also log all box values for exported and non-exported parts
- fixed texture overrides not applying to `attach=true` or vanilla parts
- fixed animations breaking when the same part transform or variable is declared / updated more than once over all the animation entries
- added tickdelta to the death time variable *(fixes jittering in packs like skeleton death physics)*
- fixed not all instances of `this` being correctly resolved in animation math
- added spelling correction warnings for frequently misspelled variables like `is_aggressive`
- variables not being found now log as errors rather than warnings and will now correctly default to false for unknown booleans

- now requires ETF 6.2.1 or newer
- fixed a model setup error that would break villager and warden, clothing and glowing textures with custom models that declared textures
- is_hover now respects the players current block interaction range for block entities
- id variable now matches OptiFine's value exactly
- reworked the player_cape.jem implementation to be more mod compatible, e.g. `wavey capes` mod can now correctly overwrite it & essentials works with it now
- swapped subfolder load priority for models. `optifine/cem/skeleton/skeleton.jem` now loads before `optifine/cem/skeleton.jem` matching optifine behaviour
- added an OptiFine compat setting to require submodel folders to have variants, e.g. `optifine/cem/skeleton/skeleton.jem` will not load without a `optifine/cem/skeleton/skeleton2.jem` or a valid .properties file.
- model exports no longer print rotation float values as doubles
- model exports now also log all box values for exported and non-exported parts
- fixed texture overrides not applying to `attach=true` or vanilla parts
- fixed animations breaking when the same part transform or variable is declared / updated more than once over all the animation entries
- added tickdelta to the death time variable *(fixes jittering in packs like skeleton death physics)*
- fixed not all instances of `this` being correctly resolved in animation math
- added spelling correction warnings for frequently misspelled variables like `is_aggressive`
- variables not being found now log as errors rather than warnings and will now correctly default to false for unknown booleans

- now requires ETF 6.2.1 or newer
- fixed a model setup error that would break villager and warden, clothing and glowing textures with custom models that declared textures
- is_hover now respects the players current block interaction range for block entities
- id variable now matches OptiFine's value exactly
- reworked the player_cape.jem implementation to be more mod compatible, e.g. `wavey capes` mod can now correctly overwrite it & essentials works with it now
- swapped subfolder load priority for models. `optifine/cem/skeleton/skeleton.jem` now loads before `optifine/cem/skeleton.jem` matching optifine behaviour
- added an OptiFine compat setting to require submodel folders to have variants, e.g. `optifine/cem/skeleton/skeleton.jem` will not load without a `optifine/cem/skeleton/skeleton2.jem` or a valid .properties file.
- model exports no longer print rotation float values as doubles
- model exports now also log all box values for exported and non-exported parts
- fixed texture overrides not applying to `attach=true` or vanilla parts
- fixed animations breaking when the same part transform or variable is declared / updated more than once over all the animation entries
- added tickdelta to the death time variable *(fixes jittering in packs like skeleton death physics)*
- fixed not all instances of `this` being correctly resolved in animation math
- added spelling correction warnings for frequently misspelled variables like `is_aggressive`
- variables not being found now log as errors rather than warnings and will now correctly default to false for unknown booleans

- now requires ETF 6.2.1 or newer
- fixed a model setup error that would break villager and warden, clothing and glowing textures with custom models that declared textures
- is_hover now respects the players current block interaction range for block entities
- id variable now matches OptiFine's value exactly
- reworked the player_cape.jem implementation to be more mod compatible, e.g. `wavey capes` mod can now correctly overwrite it & essentials works with it now
- swapped subfolder load priority for models. `optifine/cem/skeleton/skeleton.jem` now loads before `optifine/cem/skeleton.jem` matching optifine behaviour
- added an OptiFine compat setting to require submodel folders to have variants, e.g. `optifine/cem/skeleton/skeleton.jem` will not load without a `optifine/cem/skeleton/skeleton2.jem` or a valid .properties file.
- model exports no longer print rotation float values as doubles
- model exports now also log all box values for exported and non-exported parts
- fixed texture overrides not applying to `attach=true` or vanilla parts
- fixed animations breaking when the same part transform or variable is declared / updated more than once over all the animation entries
- added tickdelta to the death time variable *(fixes jittering in packs like skeleton death physics)*
- fixed not all instances of `this` being correctly resolved in animation math
- added spelling correction warnings for frequently misspelled variables like `is_aggressive`
- variables not being found now log as errors rather than warnings and will now correctly default to false for unknown booleans

- now requires ETF 6.2.1 or newer
- fixed a model setup error that would break villager and warden, clothing and glowing textures with custom models that declared textures
- is_hover now respects the players current block interaction range for block entities
- id variable now matches OptiFine's value exactly
- reworked the player_cape.jem implementation to be more mod compatible, e.g. `wavey capes` mod can now correctly overwrite it & essentials works with it now
- swapped subfolder load priority for models. `optifine/cem/skeleton/skeleton.jem` now loads before `optifine/cem/skeleton.jem` matching optifine behaviour
- added an OptiFine compat setting to require submodel folders to have variants, e.g. `optifine/cem/skeleton/skeleton.jem` will not load without a `optifine/cem/skeleton/skeleton2.jem` or a valid .properties file.
- model exports no longer print rotation float values as doubles
- model exports now also log all box values for exported and non-exported parts
- fixed texture overrides not applying to `attach=true` or vanilla parts
- fixed animations breaking when the same part transform or variable is declared / updated more than once over all the animation entries
- added tickdelta to the death time variable *(fixes jittering in packs like skeleton death physics)*
- fixed not all instances of `this` being correctly resolved in animation math
- added spelling correction warnings for frequently misspelled variables like `is_aggressive`
- variables not being found now log as errors rather than warnings and will now correctly default to false for unknown booleans

- now requires ETF 6.2.1 or newer
- fixed a model setup error that would break villager and warden, clothing and glowing textures with custom models that declared textures
- is_hover now respects the players current block interaction range for block entities
- id variable now matches OptiFine's value exactly
- reworked the player_cape.jem implementation to be more mod compatible, e.g. `wavey capes` mod can now correctly overwrite it & essentials works with it now
- swapped subfolder load priority for models. `optifine/cem/skeleton/skeleton.jem` now loads before `optifine/cem/skeleton.jem` matching optifine behaviour
- added an OptiFine compat setting to require submodel folders to have variants, e.g. `optifine/cem/skeleton/skeleton.jem` will not load without a `optifine/cem/skeleton/skeleton2.jem` or a valid .properties file.
- model exports no longer print rotation float values as doubles
- model exports now also log all box values for exported and non-exported parts
- fixed texture overrides not applying to `attach=true` or vanilla parts
- fixed animations breaking when the same part transform or variable is declared / updated more than once over all the animation entries
- added tickdelta to the death time variable *(fixes jittering in packs like skeleton death physics)*
- fixed not all instances of `this` being correctly resolved in animation math
- added spelling correction warnings for frequently misspelled variables like `is_aggressive`
- variables not being found now log as errors rather than warnings and will now correctly default to false for unknown booleans

- now requires ETF 6.2.1 or newer
- fixed a model setup error that would break villager and warden, clothing and glowing textures with custom models that declared textures
- is_hover now respects the players current block interaction range for block entities
- id variable now matches OptiFine's value exactly
- reworked the player_cape.jem implementation to be more mod compatible, e.g. `wavey capes` mod can now correctly overwrite it & essentials works with it now
- swapped subfolder load priority for models. `optifine/cem/skeleton/skeleton.jem` now loads before `optifine/cem/skeleton.jem` matching optifine behaviour
- added an OptiFine compat setting to require submodel folders to have variants, e.g. `optifine/cem/skeleton/skeleton.jem` will not load without a `optifine/cem/skeleton/skeleton2.jem` or a valid .properties file.
- model exports no longer print rotation float values as doubles
- model exports now also log all box values for exported and non-exported parts
- fixed texture overrides not applying to `attach=true` or vanilla parts
- fixed animations breaking when the same part transform or variable is declared / updated more than once over all the animation entries
- added tickdelta to the death time variable *(fixes jittering in packs like skeleton death physics)*
- fixed not all instances of `this` being correctly resolved in animation math
- added spelling correction warnings for frequently misspelled variables like `is_aggressive`
- variables not being found now log as errors rather than warnings and will now correctly default to false for unknown booleans

- now requires ETF 6.2.1 or newer
- fixed a model setup error that would break villager and warden, clothing and glowing textures with custom models that declared textures
- is_hover now respects the players current block interaction range for block entities
- id variable now matches OptiFine's value exactly
- reworked the player_cape.jem implementation to be more mod compatible, e.g. `wavey capes` mod can now correctly overwrite it & essentials works with it now
- swapped subfolder load priority for models. `optifine/cem/skeleton/skeleton.jem` now loads before `optifine/cem/skeleton.jem` matching optifine behaviour
- added an OptiFine compat setting to require submodel folders to have variants, e.g. `optifine/cem/skeleton/skeleton.jem` will not load without a `optifine/cem/skeleton/skeleton2.jem` or a valid .properties file.
- model exports no longer print rotation float values as doubles
- model exports now also log all box values for exported and non-exported parts
- fixed texture overrides not applying to `attach=true` or vanilla parts
- fixed animations breaking when the same part transform or variable is declared / updated more than once over all the animation entries
- added tickdelta to the death time variable *(fixes jittering in packs like skeleton death physics)*
- fixed not all instances of `this` being correctly resolved in animation math
- added spelling correction warnings for frequently misspelled variables like `is_aggressive`
- variables not being found now log as errors rather than warnings and will now correctly default to false for unknown booleans

- now requires ETF 6.2.1 or newer
- fixed a model setup error that would break villager and warden, clothing and glowing textures with custom models that declared textures
- is_hover now respects the players current block interaction range for block entities
- id variable now matches OptiFine's value exactly
- reworked the player_cape.jem implementation to be more mod compatible, e.g. `wavey capes` mod can now correctly overwrite it & essentials works with it now
- swapped subfolder load priority for models. `optifine/cem/skeleton/skeleton.jem` now loads before `optifine/cem/skeleton.jem` matching optifine behaviour
- added an OptiFine compat setting to require submodel folders to have variants, e.g. `optifine/cem/skeleton/skeleton.jem` will not load without a `optifine/cem/skeleton/skeleton2.jem` or a valid .properties file.
- model exports no longer print rotation float values as doubles
- model exports now also log all box values for exported and non-exported parts
- fixed texture overrides not applying to `attach=true` or vanilla parts
- fixed animations breaking when the same part transform or variable is declared / updated more than once over all the animation entries
- added tickdelta to the death time variable *(fixes jittering in packs like skeleton death physics)*
- fixed not all instances of `this` being correctly resolved in animation math
- added spelling correction warnings for frequently misspelled variables like `is_aggressive`
- variables not being found now log as errors rather than warnings and will now correctly default to false for unknown booleans

- now requires ETF 6.2.1 or newer
- fixed a model setup error that would break villager and warden, clothing and glowing textures with custom models that declared textures
- is_hover now respects the players current block interaction range for block entities
- id variable now matches OptiFine's value exactly
- reworked the player_cape.jem implementation to be more mod compatible, e.g. `wavey capes` mod can now correctly overwrite it & essentials works with it now
- swapped subfolder load priority for models. `optifine/cem/skeleton/skeleton.jem` now loads before `optifine/cem/skeleton.jem` matching optifine behaviour
- added an OptiFine compat setting to require submodel folders to have variants, e.g. `optifine/cem/skeleton/skeleton.jem` will not load without a `optifine/cem/skeleton/skeleton2.jem` or a valid .properties file.
- model exports no longer print rotation float values as doubles
- model exports now also log all box values for exported and non-exported parts
- fixed texture overrides not applying to `attach=true` or vanilla parts
- fixed animations breaking when the same part transform or variable is declared / updated more than once over all the animation entries
- added tickdelta to the death time variable *(fixes jittering in packs like skeleton death physics)*
- fixed not all instances of `this` being correctly resolved in animation math
- added spelling correction warnings for frequently misspelled variables like `is_aggressive`
- variables not being found now log as errors rather than warnings and will now correctly default to false for unknown booleans

- now requires ETF 6.2.1 or newer
- fixed a model setup error that would break villager and warden, clothing and glowing textures with custom models that declared textures
- is_hover now respects the players current block interaction range for block entities
- id variable now matches OptiFine's value exactly
- reworked the player_cape.jem implementation to be more mod compatible, e.g. `wavey capes` mod can now correctly overwrite it & essentials works with it now
- swapped subfolder load priority for models. `optifine/cem/skeleton/skeleton.jem` now loads before `optifine/cem/skeleton.jem` matching optifine behaviour
- added an OptiFine compat setting to require submodel folders to have variants, e.g. `optifine/cem/skeleton/skeleton.jem` will not load without a `optifine/cem/skeleton/skeleton2.jem` or a valid .properties file.
- model exports no longer print rotation float values as doubles
- model exports now also log all box values for exported and non-exported parts
- fixed texture overrides not applying to `attach=true` or vanilla parts
- fixed animations breaking when the same part transform or variable is declared / updated more than once over all the animation entries
- added tickdelta to the death time variable *(fixes jittering in packs like skeleton death physics)*
- fixed not all instances of `this` being correctly resolved in animation math
- added spelling correction warnings for frequently misspelled variables like `is_aggressive`
- variables not being found now log as errors rather than warnings and will now correctly default to false for unknown booleans

- now requires ETF 6.2.1 or newer
- fixed a model setup error that would break villager and warden, clothing and glowing textures with custom models that declared textures
- is_hover now respects the players current block interaction range for block entities
- id variable now matches OptiFine's value exactly
- reworked the player_cape.jem implementation to be more mod compatible, e.g. `wavey capes` mod can now correctly overwrite it & essentials works with it now
- swapped subfolder load priority for models. `optifine/cem/skeleton/skeleton.jem` now loads before `optifine/cem/skeleton.jem` matching optifine behaviour
- added an OptiFine compat setting to require submodel folders to have variants, e.g. `optifine/cem/skeleton/skeleton.jem` will not load without a `optifine/cem/skeleton/skeleton2.jem` or a valid .properties file.
- model exports no longer print rotation float values as doubles
- model exports now also log all box values for exported and non-exported parts
- fixed texture overrides not applying to `attach=true` or vanilla parts
- fixed animations breaking when the same part transform or variable is declared / updated more than once over all the animation entries
- added tickdelta to the death time variable *(fixes jittering in packs like skeleton death physics)*
- fixed not all instances of `this` being correctly resolved in animation math
- added spelling correction warnings for frequently misspelled variables like `is_aggressive`
- variables not being found now log as errors rather than warnings and will now correctly default to false for unknown booleans

- now requires ETF 6.2.1 or newer
- fixed a model setup error that would break villager and warden, clothing and glowing textures with custom models that declared textures
- is_hover now respects the players current block interaction range for block entities
- id variable now matches OptiFine's value exactly
- reworked the player_cape.jem implementation to be more mod compatible, e.g. `wavey capes` mod can now correctly overwrite it & essentials works with it now
- swapped subfolder load priority for models. `optifine/cem/skeleton/skeleton.jem` now loads before `optifine/cem/skeleton.jem` matching optifine behaviour
- added an OptiFine compat setting to require submodel folders to have variants, e.g. `optifine/cem/skeleton/skeleton.jem` will not load without a `optifine/cem/skeleton/skeleton2.jem` or a valid .properties file.
- model exports no longer print rotation float values as doubles
- model exports now also log all box values for exported and non-exported parts
- fixed texture overrides not applying to `attach=true` or vanilla parts
- fixed animations breaking when the same part transform or variable is declared / updated more than once over all the animation entries
- added tickdelta to the death time variable *(fixes jittering in packs like skeleton death physics)*
- fixed not all instances of `this` being correctly resolved in animation math
- added spelling correction warnings for frequently misspelled variables like `is_aggressive`
- variables not being found now log as errors rather than warnings and will now correctly default to false for unknown booleans

[2.2]
- fixed forge 1.21 & 1.20.6 compat
- fixed issues when used with the Sodium 0.6 betas
- Added a setting to make EMF reset all the vanilla part transforms of player models well before every render.
- Only applies if custom models are present for the player.
- This is not the typical behaviour however with how many mods alter player animations
- this setting vastly reduces the difficulty of player animation compatibility between mods and animation packs.
- E.G. player emote mods.
- This compatibility still requires work on the pack makers end.
- added the `nbt(key,test)` boolean animation function it works exactly like the nbt random property such that `models.1.SaddleItem=exits:false` will be `nbt(SaddleItem,exists:false)`
- added boolean animation variable `is_paused` true when the game is paused
- added boolean animation variable `is_hovered` true when the client is looking at the entity or block entity position
- added an option in model debug settings to only render models in debug mode when the mob is hovered over
- added a setting to control whether EMF requires a 'base' model for model variation like OptiFine *(e.g. `pig2.jem` requires a `pig.jem` to work)*. This setting is now enabled by default to promote backwards compatibility and prevent confusion.
- tweaked the `keyframe()` & `keyframeloop()` animation functions to use catmulrom spline interpolation for smooth transitions between keyframes, factoring in the previous and upcoming frames
- fixed villager clothing and profession textures failing to render when a texture override is set in the model
- fixed an issue with `chest_large.jem` due to how it has to be split into 2 half models in game, this removes the log spam about the missing left/right half and also somewhat fixes animations referring to the opposite side of the chest, you are still highly recommended to keep the left and right half animations separate. A config option has been enabled to toggle this fix in case of modded chest model conflicts.
- fixed `slime_outer` models removing translucency when using texture overrides
- fixed `is_swinging_right_arm` and `is_swinging_left_arm`
- added `is_using_item` true when any item is being used, usually you can detect which arm via `is_swinging_right_arm` and `is_swinging_left_arm` but this is not reliable for all item usages
- added `is_holding_item_right` and `is_holding_item_left` to detect if the entity is holding an item in the right or left hand, may not work for all entities that hold items, only tested with players
- added vex charging to `is_aggressive` variable and also made it potentially more consistent with modded mobs
- fixed variation for special secondary or backup models, like `outer_armor.jem`. or old directory modded models.
- fixed the print animation methods accidentally printing during pre-validation
- signs and boats now have optional override models, based on how vanilla separates every sign and boat variant into its own models, these are only identifiable by enabling model creation logging and seeing what they are called there, and if absent will fallback to the optifine defaults.
- improved the file name and location displays in the config list of all models
- added the emf 16x logo to the config gui to replace the full logo
- improvements to texture overrides, emf now strips redundant texture declarations to improve runtime efficiency *(e.g. ignores `pig.png` declared in `pig.jem` as its redundant)*
- fixed an issue with some entity animation values getting reset during entity feature layer rendering and not being restored correctly

[2.2]
- fixed forge 1.21 & 1.20.6 compat
- fixed issues when used with the Sodium 0.6 betas
- Added a setting to make EMF reset all the vanilla part transforms of player models well before every render.
- Only applies if custom models are present for the player.
- This is not the typical behaviour however with how many mods alter player animations
- this setting vastly reduces the difficulty of player animation compatibility between mods and animation packs.
- E.G. player emote mods.
- This compatibility still requires work on the pack makers end.
- added the `nbt(key,test)` boolean animation function it works exactly like the nbt random property such that `models.1.SaddleItem=exits:false` will be `nbt(SaddleItem,exists:false)`
- added boolean animation variable `is_paused` true when the game is paused
- added boolean animation variable `is_hovered` true when the client is looking at the entity or block entity position
- added an option in model debug settings to only render models in debug mode when the mob is hovered over
- added a setting to control whether EMF requires a 'base' model for model variation like OptiFine *(e.g. `pig2.jem` requires a `pig.jem` to work)*. This setting is now enabled by default to promote backwards compatibility and prevent confusion.
- tweaked the `keyframe()` & `keyframeloop()` animation functions to use catmulrom spline interpolation for smooth transitions between keyframes, factoring in the previous and upcoming frames
- fixed villager clothing and profession textures failing to render when a texture override is set in the model
- fixed an issue with `chest_large.jem` due to how it has to be split into 2 half models in game, this removes the log spam about the missing left/right half and also somewhat fixes animations referring to the opposite side of the chest, you are still highly recommended to keep the left and right half animations separate. A config option has been enabled to toggle this fix in case of modded chest model conflicts.
- fixed `slime_outer` models removing translucency when using texture overrides
- fixed `is_swinging_right_arm` and `is_swinging_left_arm`
- added `is_using_item` true when any item is being used, usually you can detect which arm via `is_swinging_right_arm` and `is_swinging_left_arm` but this is not reliable for all item usages
- added `is_holding_item_right` and `is_holding_item_left` to detect if the entity is holding an item in the right or left hand, may not work for all entities that hold items, only tested with players
- added vex charging to `is_aggressive` variable and also made it potentially more consistent with modded mobs
- fixed variation for special secondary or backup models, like `outer_armor.jem`. or old directory modded models.
- fixed the print animation methods accidentally printing during pre-validation
- signs and boats now have optional override models, based on how vanilla separates every sign and boat variant into its own models, these are only identifiable by enabling model creation logging and seeing what they are called there, and if absent will fallback to the optifine defaults.
- improved the file name and location displays in the config list of all models
- added the emf 16x logo to the config gui to replace the full logo
- improvements to texture overrides, emf now strips redundant texture declarations to improve runtime efficiency *(e.g. ignores `pig.png` declared in `pig.jem` as its redundant)*
- fixed an issue with some entity animation values getting reset during entity feature layer rendering and not being restored correctly

[2.2]
- fixed forge 1.21 & 1.20.6 compat
- fixed issues when used with the Sodium 0.6 betas
- Added a setting to make EMF reset all the vanilla part transforms of player models well before every render.
- Only applies if custom models are present for the player.
- This is not the typical behaviour however with how many mods alter player animations
- this setting vastly reduces the difficulty of player animation compatibility between mods and animation packs.
- E.G. player emote mods.
- This compatibility still requires work on the pack makers end.
- added the `nbt(key,test)` boolean animation function it works exactly like the nbt random property such that `models.1.SaddleItem=exits:false` will be `nbt(SaddleItem,exists:false)`
- added boolean animation variable `is_paused` true when the game is paused
- added boolean animation variable `is_hovered` true when the client is looking at the entity or block entity position
- added an option in model debug settings to only render models in debug mode when the mob is hovered over
- added a setting to control whether EMF requires a 'base' model for model variation like OptiFine *(e.g. `pig2.jem` requires a `pig.jem` to work)*. This setting is now enabled by default to promote backwards compatibility and prevent confusion.
- tweaked the `keyframe()` & `keyframeloop()` animation functions to use catmulrom spline interpolation for smooth transitions between keyframes, factoring in the previous and upcoming frames
- fixed villager clothing and profession textures failing to render when a texture override is set in the model
- fixed an issue with `chest_large.jem` due to how it has to be split into 2 half models in game, this removes the log spam about the missing left/right half and also somewhat fixes animations referring to the opposite side of the chest, you are still highly recommended to keep the left and right half animations separate. A config option has been enabled to toggle this fix in case of modded chest model conflicts.
- fixed `slime_outer` models removing translucency when using texture overrides
- fixed `is_swinging_right_arm` and `is_swinging_left_arm`
- added `is_using_item` true when any item is being used, usually you can detect which arm via `is_swinging_right_arm` and `is_swinging_left_arm` but this is not reliable for all item usages
- added `is_holding_item_right` and `is_holding_item_left` to detect if the entity is holding an item in the right or left hand, may not work for all entities that hold items, only tested with players
- added vex charging to `is_aggressive` variable and also made it potentially more consistent with modded mobs
- fixed variation for special secondary or backup models, like `outer_armor.jem`. or old directory modded models.
- fixed the print animation methods accidentally printing during pre-validation
- signs and boats now have optional override models, based on how vanilla separates every sign and boat variant into its own models, these are only identifiable by enabling model creation logging and seeing what they are called there, and if absent will fallback to the optifine defaults.
- improved the file name and location displays in the config list of all models
- added the emf 16x logo to the config gui to replace the full logo
- improvements to texture overrides, emf now strips redundant texture declarations to improve runtime efficiency *(e.g. ignores `pig.png` declared in `pig.jem` as its redundant)*
- fixed an issue with some entity animation values getting reset during entity feature layer rendering and not being restored correctly

[2.2]
- fixed forge 1.21 & 1.20.6 compat
- fixed issues when used with the Sodium 0.6 betas
- Added a setting to make EMF reset all the vanilla part transforms of player models well before every render.
- Only applies if custom models are present for the player.
- This is not the typical behaviour however with how many mods alter player animations
- this setting vastly reduces the difficulty of player animation compatibility between mods and animation packs.
- E.G. player emote mods.
- This compatibility still requires work on the pack makers end.
- added the `nbt(key,test)` boolean animation function it works exactly like the nbt random property such that `models.1.SaddleItem=exits:false` will be `nbt(SaddleItem,exists:false)`
- added boolean animation variable `is_paused` true when the game is paused
- added boolean animation variable `is_hovered` true when the client is looking at the entity or block entity position
- added an option in model debug settings to only render models in debug mode when the mob is hovered over
- added a setting to control whether EMF requires a 'base' model for model variation like OptiFine *(e.g. `pig2.jem` requires a `pig.jem` to work)*. This setting is now enabled by default to promote backwards compatibility and prevent confusion.
- tweaked the `keyframe()` & `keyframeloop()` animation functions to use catmulrom spline interpolation for smooth transitions between keyframes, factoring in the previous and upcoming frames
- fixed villager clothing and profession textures failing to render when a texture override is set in the model
- fixed an issue with `chest_large.jem` due to how it has to be split into 2 half models in game, this removes the log spam about the missing left/right half and also somewhat fixes animations referring to the opposite side of the chest, you are still highly recommended to keep the left and right half animations separate. A config option has been enabled to toggle this fix in case of modded chest model conflicts.
- fixed `slime_outer` models removing translucency when using texture overrides
- fixed `is_swinging_right_arm` and `is_swinging_left_arm`
- added `is_using_item` true when any item is being used, usually you can detect which arm via `is_swinging_right_arm` and `is_swinging_left_arm` but this is not reliable for all item usages
- added `is_holding_item_right` and `is_holding_item_left` to detect if the entity is holding an item in the right or left hand, may not work for all entities that hold items, only tested with players
- added vex charging to `is_aggressive` variable and also made it potentially more consistent with modded mobs
- fixed variation for special secondary or backup models, like `outer_armor.jem`. or old directory modded models.
- fixed the print animation methods accidentally printing during pre-validation
- signs and boats now have optional override models, based on how vanilla separates every sign and boat variant into its own models, these are only identifiable by enabling model creation logging and seeing what they are called there, and if absent will fallback to the optifine defaults.
- improved the file name and location displays in the config list of all models
- added the emf 16x logo to the config gui to replace the full logo
- improvements to texture overrides, emf now strips redundant texture declarations to improve runtime efficiency *(e.g. ignores `pig.png` declared in `pig.jem` as its redundant)*
- fixed an issue with some entity animation values getting reset during entity feature layer rendering and not being restored correctly

[2.2]
- fixed forge 1.21 & 1.20.6 compat
- fixed issues when used with the Sodium 0.6 betas
- Added a setting to make EMF reset all the vanilla part transforms of player models well before every render.
- Only applies if custom models are present for the player.
- This is not the typical behaviour however with how many mods alter player animations
- this setting vastly reduces the difficulty of player animation compatibility between mods and animation packs.
- E.G. player emote mods.
- This compatibility still requires work on the pack makers end.
- added the `nbt(key,test)` boolean animation function it works exactly like the nbt random property such that `models.1.SaddleItem=exits:false` will be `nbt(SaddleItem,exists:false)`
- added boolean animation variable `is_paused` true when the game is paused
- added boolean animation variable `is_hovered` true when the client is looking at the entity or block entity position
- added an option in model debug settings to only render models in debug mode when the mob is hovered over
- added a setting to control whether EMF requires a 'base' model for model variation like OptiFine *(e.g. `pig2.jem` requires a `pig.jem` to work)*. This setting is now enabled by default to promote backwards compatibility and prevent confusion.
- tweaked the `keyframe()` & `keyframeloop()` animation functions to use catmulrom spline interpolation for smooth transitions between keyframes, factoring in the previous and upcoming frames
- fixed villager clothing and profession textures failing to render when a texture override is set in the model
- fixed an issue with `chest_large.jem` due to how it has to be split into 2 half models in game, this removes the log spam about the missing left/right half and also somewhat fixes animations referring to the opposite side of the chest, you are still highly recommended to keep the left and right half animations separate. A config option has been enabled to toggle this fix in case of modded chest model conflicts.
- fixed `slime_outer` models removing translucency when using texture overrides
- fixed `is_swinging_right_arm` and `is_swinging_left_arm`
- added `is_using_item` true when any item is being used, usually you can detect which arm via `is_swinging_right_arm` and `is_swinging_left_arm` but this is not reliable for all item usages
- added `is_holding_item_right` and `is_holding_item_left` to detect if the entity is holding an item in the right or left hand, may not work for all entities that hold items, only tested with players
- added vex charging to `is_aggressive` variable and also made it potentially more consistent with modded mobs
- fixed variation for special secondary or backup models, like `outer_armor.jem`. or old directory modded models.
- fixed the print animation methods accidentally printing during pre-validation
- signs and boats now have optional override models, based on how vanilla separates every sign and boat variant into its own models, these are only identifiable by enabling model creation logging and seeing what they are called there, and if absent will fallback to the optifine defaults.
- improved the file name and location displays in the config list of all models
- added the emf 16x logo to the config gui to replace the full logo
- improvements to texture overrides, emf now strips redundant texture declarations to improve runtime efficiency *(e.g. ignores `pig.png` declared in `pig.jem` as its redundant)*
- fixed an issue with some entity animation values getting reset during entity feature layer rendering and not being restored correctly

[2.2]
- fixed forge 1.21 & 1.20.6 compat
- fixed issues when used with the Sodium 0.6 betas
- Added a setting to make EMF reset all the vanilla part transforms of player models well before every render.
- Only applies if custom models are present for the player.
- This is not the typical behaviour however with how many mods alter player animations
- this setting vastly reduces the difficulty of player animation compatibility between mods and animation packs.
- E.G. player emote mods.
- This compatibility still requires work on the pack makers end.
- added the `nbt(key,test)` boolean animation function it works exactly like the nbt random property such that `models.1.SaddleItem=exits:false` will be `nbt(SaddleItem,exists:false)`
- added boolean animation variable `is_paused` true when the game is paused
- added boolean animation variable `is_hovered` true when the client is looking at the entity or block entity position
- added an option in model debug settings to only render models in debug mode when the mob is hovered over
- added a setting to control whether EMF requires a 'base' model for model variation like OptiFine *(e.g. `pig2.jem` requires a `pig.jem` to work)*. This setting is now enabled by default to promote backwards compatibility and prevent confusion.
- tweaked the `keyframe()` & `keyframeloop()` animation functions to use catmulrom spline interpolation for smooth transitions between keyframes, factoring in the previous and upcoming frames
- fixed villager clothing and profession textures failing to render when a texture override is set in the model
- fixed an issue with `chest_large.jem` due to how it has to be split into 2 half models in game, this removes the log spam about the missing left/right half and also somewhat fixes animations referring to the opposite side of the chest, you are still highly recommended to keep the left and right half animations separate. A config option has been enabled to toggle this fix in case of modded chest model conflicts.
- fixed `slime_outer` models removing translucency when using texture overrides
- fixed `is_swinging_right_arm` and `is_swinging_left_arm`
- added `is_using_item` true when any item is being used, usually you can detect which arm via `is_swinging_right_arm` and `is_swinging_left_arm` but this is not reliable for all item usages
- added `is_holding_item_right` and `is_holding_item_left` to detect if the entity is holding an item in the right or left hand, may not work for all entities that hold items, only tested with players
- added vex charging to `is_aggressive` variable and also made it potentially more consistent with modded mobs
- fixed variation for special secondary or backup models, like `outer_armor.jem`. or old directory modded models.
- fixed the print animation methods accidentally printing during pre-validation
- signs and boats now have optional override models, based on how vanilla separates every sign and boat variant into its own models, these are only identifiable by enabling model creation logging and seeing what they are called there, and if absent will fallback to the optifine defaults.
- improved the file name and location displays in the config list of all models
- added the emf 16x logo to the config gui to replace the full logo
- improvements to texture overrides, emf now strips redundant texture declarations to improve runtime efficiency *(e.g. ignores `pig.png` declared in `pig.jem` as its redundant)*
- fixed an issue with some entity animation values getting reset during entity feature layer rendering and not being restored correctly

[2.2]
- fixed forge 1.21 & 1.20.6 compat
- fixed issues when used with the Sodium 0.6 betas
- Added a setting to make EMF reset all the vanilla part transforms of player models well before every render.
- Only applies if custom models are present for the player.
- This is not the typical behaviour however with how many mods alter player animations
- this setting vastly reduces the difficulty of player animation compatibility between mods and animation packs.
- E.G. player emote mods.
- This compatibility still requires work on the pack makers end.
- added the `nbt(key,test)` boolean animation function it works exactly like the nbt random property such that `models.1.SaddleItem=exits:false` will be `nbt(SaddleItem,exists:false)`
- added boolean animation variable `is_paused` true when the game is paused
- added boolean animation variable `is_hovered` true when the client is looking at the entity or block entity position
- added an option in model debug settings to only render models in debug mode when the mob is hovered over
- added a setting to control whether EMF requires a 'base' model for model variation like OptiFine *(e.g. `pig2.jem` requires a `pig.jem` to work)*. This setting is now enabled by default to promote backwards compatibility and prevent confusion.
- tweaked the `keyframe()` & `keyframeloop()` animation functions to use catmulrom spline interpolation for smooth transitions between keyframes, factoring in the previous and upcoming frames
- fixed villager clothing and profession textures failing to render when a texture override is set in the model
- fixed an issue with `chest_large.jem` due to how it has to be split into 2 half models in game, this removes the log spam about the missing left/right half and also somewhat fixes animations referring to the opposite side of the chest, you are still highly recommended to keep the left and right half animations separate. A config option has been enabled to toggle this fix in case of modded chest model conflicts.
- fixed `slime_outer` models removing translucency when using texture overrides
- fixed `is_swinging_right_arm` and `is_swinging_left_arm`
- added `is_using_item` true when any item is being used, usually you can detect which arm via `is_swinging_right_arm` and `is_swinging_left_arm` but this is not reliable for all item usages
- added `is_holding_item_right` and `is_holding_item_left` to detect if the entity is holding an item in the right or left hand, may not work for all entities that hold items, only tested with players
- added vex charging to `is_aggressive` variable and also made it potentially more consistent with modded mobs
- fixed variation for special secondary or backup models, like `outer_armor.jem`. or old directory modded models.
- fixed the print animation methods accidentally printing during pre-validation
- signs and boats now have optional override models, based on how vanilla separates every sign and boat variant into its own models, these are only identifiable by enabling model creation logging and seeing what they are called there, and if absent will fallback to the optifine defaults.
- improved the file name and location displays in the config list of all models
- added the emf 16x logo to the config gui to replace the full logo
- improvements to texture overrides, emf now strips redundant texture declarations to improve runtime efficiency *(e.g. ignores `pig.png` declared in `pig.jem` as its redundant)*
- fixed an issue with some entity animation values getting reset during entity feature layer rendering and not being restored correctly

[2.2]
- fixed forge 1.21 & 1.20.6 compat
- fixed issues when used with the Sodium 0.6 betas
- Added a setting to make EMF reset all the vanilla part transforms of player models well before every render.
- Only applies if custom models are present for the player.
- This is not the typical behaviour however with how many mods alter player animations
- this setting vastly reduces the difficulty of player animation compatibility between mods and animation packs.
- E.G. player emote mods.
- This compatibility still requires work on the pack makers end.
- added the `nbt(key,test)` boolean animation function it works exactly like the nbt random property such that `models.1.SaddleItem=exits:false` will be `nbt(SaddleItem,exists:false)`
- added boolean animation variable `is_paused` true when the game is paused
- added boolean animation variable `is_hovered` true when the client is looking at the entity or block entity position
- added an option in model debug settings to only render models in debug mode when the mob is hovered over
- added a setting to control whether EMF requires a 'base' model for model variation like OptiFine *(e.g. `pig2.jem` requires a `pig.jem` to work)*. This setting is now enabled by default to promote backwards compatibility and prevent confusion.
- tweaked the `keyframe()` & `keyframeloop()` animation functions to use catmulrom spline interpolation for smooth transitions between keyframes, factoring in the previous and upcoming frames
- fixed villager clothing and profession textures failing to render when a texture override is set in the model
- fixed an issue with `chest_large.jem` due to how it has to be split into 2 half models in game, this removes the log spam about the missing left/right half and also somewhat fixes animations referring to the opposite side of the chest, you are still highly recommended to keep the left and right half animations separate. A config option has been enabled to toggle this fix in case of modded chest model conflicts.
- fixed `slime_outer` models removing translucency when using texture overrides
- fixed `is_swinging_right_arm` and `is_swinging_left_arm`
- added `is_using_item` true when any item is being used, usually you can detect which arm via `is_swinging_right_arm` and `is_swinging_left_arm` but this is not reliable for all item usages
- added `is_holding_item_right` and `is_holding_item_left` to detect if the entity is holding an item in the right or left hand, may not work for all entities that hold items, only tested with players
- added vex charging to `is_aggressive` variable and also made it potentially more consistent with modded mobs
- fixed variation for special secondary or backup models, like `outer_armor.jem`. or old directory modded models.
- fixed the print animation methods accidentally printing during pre-validation
- signs and boats now have optional override models, based on how vanilla separates every sign and boat variant into its own models, these are only identifiable by enabling model creation logging and seeing what they are called there, and if absent will fallback to the optifine defaults.
- improved the file name and location displays in the config list of all models
- added the emf 16x logo to the config gui to replace the full logo
- improvements to texture overrides, emf now strips redundant texture declarations to improve runtime efficiency *(e.g. ignores `pig.png` declared in `pig.jem` as its redundant)*
- fixed an issue with some entity animation values getting reset during entity feature layer rendering and not being restored correctly

[2.2]
- fixed forge 1.21 & 1.20.6 compat
- fixed issues when used with the Sodium 0.6 betas
- Added a setting to make EMF reset all the vanilla part transforms of player models well before every render.
- Only applies if custom models are present for the player.
- This is not the typical behaviour however with how many mods alter player animations
- this setting vastly reduces the difficulty of player animation compatibility between mods and animation packs.
- E.G. player emote mods.
- This compatibility still requires work on the pack makers end.
- added the `nbt(key,test)` boolean animation function it works exactly like the nbt random property such that `models.1.SaddleItem=exits:false` will be `nbt(SaddleItem,exists:false)`
- added boolean animation variable `is_paused` true when the game is paused
- added boolean animation variable `is_hovered` true when the client is looking at the entity or block entity position
- added an option in model debug settings to only render models in debug mode when the mob is hovered over
- added a setting to control whether EMF requires a 'base' model for model variation like OptiFine *(e.g. `pig2.jem` requires a `pig.jem` to work)*. This setting is now enabled by default to promote backwards compatibility and prevent confusion.
- tweaked the `keyframe()` & `keyframeloop()` animation functions to use catmulrom spline interpolation for smooth transitions between keyframes, factoring in the previous and upcoming frames
- fixed villager clothing and profession textures failing to render when a texture override is set in the model
- fixed an issue with `chest_large.jem` due to how it has to be split into 2 half models in game, this removes the log spam about the missing left/right half and also somewhat fixes animations referring to the opposite side of the chest, you are still highly recommended to keep the left and right half animations separate. A config option has been enabled to toggle this fix in case of modded chest model conflicts.
- fixed `slime_outer` models removing translucency when using texture overrides
- fixed `is_swinging_right_arm` and `is_swinging_left_arm`
- added `is_using_item` true when any item is being used, usually you can detect which arm via `is_swinging_right_arm` and `is_swinging_left_arm` but this is not reliable for all item usages
- added `is_holding_item_right` and `is_holding_item_left` to detect if the entity is holding an item in the right or left hand, may not work for all entities that hold items, only tested with players
- added vex charging to `is_aggressive` variable and also made it potentially more consistent with modded mobs
- fixed variation for special secondary or backup models, like `outer_armor.jem`. or old directory modded models.
- fixed the print animation methods accidentally printing during pre-validation
- signs and boats now have optional override models, based on how vanilla separates every sign and boat variant into its own models, these are only identifiable by enabling model creation logging and seeing what they are called there, and if absent will fallback to the optifine defaults.
- improved the file name and location displays in the config list of all models
- added the emf 16x logo to the config gui to replace the full logo
- improvements to texture overrides, emf now strips redundant texture declarations to improve runtime efficiency *(e.g. ignores `pig.png` declared in `pig.jem` as its redundant)*
- fixed an issue with some entity animation values getting reset during entity feature layer rendering and not being restored correctly

[2.2]
- fixed forge 1.21 & 1.20.6 compat
- fixed issues when used with the Sodium 0.6 betas
- Added a setting to make EMF reset all the vanilla part transforms of player models well before every render.
- Only applies if custom models are present for the player.
- This is not the typical behaviour however with how many mods alter player animations
- this setting vastly reduces the difficulty of player animation compatibility between mods and animation packs.
- E.G. player emote mods.
- This compatibility still requires work on the pack makers end.
- added the `nbt(key,test)` boolean animation function it works exactly like the nbt random property such that `models.1.SaddleItem=exits:false` will be `nbt(SaddleItem,exists:false)`
- added boolean animation variable `is_paused` true when the game is paused
- added boolean animation variable `is_hovered` true when the client is looking at the entity or block entity position
- added an option in model debug settings to only render models in debug mode when the mob is hovered over
- added a setting to control whether EMF requires a 'base' model for model variation like OptiFine *(e.g. `pig2.jem` requires a `pig.jem` to work)*. This setting is now enabled by default to promote backwards compatibility and prevent confusion.
- tweaked the `keyframe()` & `keyframeloop()` animation functions to use catmulrom spline interpolation for smooth transitions between keyframes, factoring in the previous and upcoming frames
- fixed villager clothing and profession textures failing to render when a texture override is set in the model
- fixed an issue with `chest_large.jem` due to how it has to be split into 2 half models in game, this removes the log spam about the missing left/right half and also somewhat fixes animations referring to the opposite side of the chest, you are still highly recommended to keep the left and right half animations separate. A config option has been enabled to toggle this fix in case of modded chest model conflicts.
- fixed `slime_outer` models removing translucency when using texture overrides
- fixed `is_swinging_right_arm` and `is_swinging_left_arm`
- added `is_using_item` true when any item is being used, usually you can detect which arm via `is_swinging_right_arm` and `is_swinging_left_arm` but this is not reliable for all item usages
- added `is_holding_item_right` and `is_holding_item_left` to detect if the entity is holding an item in the right or left hand, may not work for all entities that hold items, only tested with players
- added vex charging to `is_aggressive` variable and also made it potentially more consistent with modded mobs
- fixed variation for special secondary or backup models, like `outer_armor.jem`. or old directory modded models.
- fixed the print animation methods accidentally printing during pre-validation
- signs and boats now have optional override models, based on how vanilla separates every sign and boat variant into its own models, these are only identifiable by enabling model creation logging and seeing what they are called there, and if absent will fallback to the optifine defaults.
- improved the file name and location displays in the config list of all models
- added the emf 16x logo to the config gui to replace the full logo
- improvements to texture overrides, emf now strips redundant texture declarations to improve runtime efficiency *(e.g. ignores `pig.png` declared in `pig.jem` as its redundant)*
- fixed an issue with some entity animation values getting reset during entity feature layer rendering and not being restored correctly

[2.2]
- fixed forge 1.21 & 1.20.6 compat
- fixed issues when used with the Sodium 0.6 betas
- Added a setting to make EMF reset all the vanilla part transforms of player models well before every render.
- Only applies if custom models are present for the player.
- This is not the typical behaviour however with how many mods alter player animations
- this setting vastly reduces the difficulty of player animation compatibility between mods and animation packs.
- E.G. player emote mods.
- This compatibility still requires work on the pack makers end.
- added the `nbt(key,test)` boolean animation function it works exactly like the nbt random property such that `models.1.SaddleItem=exits:false` will be `nbt(SaddleItem,exists:false)`
- added boolean animation variable `is_paused` true when the game is paused
- added boolean animation variable `is_hovered` true when the client is looking at the entity or block entity position
- added an option in model debug settings to only render models in debug mode when the mob is hovered over
- added a setting to control whether EMF requires a 'base' model for model variation like OptiFine *(e.g. `pig2.jem` requires a `pig.jem` to work)*. This setting is now enabled by default to promote backwards compatibility and prevent confusion.
- tweaked the `keyframe()` & `keyframeloop()` animation functions to use catmulrom spline interpolation for smooth transitions between keyframes, factoring in the previous and upcoming frames
- fixed villager clothing and profession textures failing to render when a texture override is set in the model
- fixed an issue with `chest_large.jem` due to how it has to be split into 2 half models in game, this removes the log spam about the missing left/right half and also somewhat fixes animations referring to the opposite side of the chest, you are still highly recommended to keep the left and right half animations separate. A config option has been enabled to toggle this fix in case of modded chest model conflicts.
- fixed `slime_outer` models removing translucency when using texture overrides
- fixed `is_swinging_right_arm` and `is_swinging_left_arm`
- added `is_using_item` true when any item is being used, usually you can detect which arm via `is_swinging_right_arm` and `is_swinging_left_arm` but this is not reliable for all item usages
- added `is_holding_item_right` and `is_holding_item_left` to detect if the entity is holding an item in the right or left hand, may not work for all entities that hold items, only tested with players
- added vex charging to `is_aggressive` variable and also made it potentially more consistent with modded mobs
- fixed variation for special secondary or backup models, like `outer_armor.jem`. or old directory modded models.
- fixed the print animation methods accidentally printing during pre-validation
- signs and boats now have optional override models, based on how vanilla separates every sign and boat variant into its own models, these are only identifiable by enabling model creation logging and seeing what they are called there, and if absent will fallback to the optifine defaults.
- improved the file name and location displays in the config list of all models
- added the emf 16x logo to the config gui to replace the full logo
- improvements to texture overrides, emf now strips redundant texture declarations to improve runtime efficiency *(e.g. ignores `pig.png` declared in `pig.jem` as its redundant)*
- fixed an issue with some entity animation values getting reset during entity feature layer rendering and not being restored correctly

[2.2]
- fixed forge 1.21 & 1.20.6 compat
- fixed issues when used with the Sodium 0.6 betas
- Added a setting to make EMF reset all the vanilla part transforms of player models well before every render.
- Only applies if custom models are present for the player.
- This is not the typical behaviour however with how many mods alter player animations
- this setting vastly reduces the difficulty of player animation compatibility between mods and animation packs.
- E.G. player emote mods.
- This compatibility still requires work on the pack makers end.
- added the `nbt(key,test)` boolean animation function it works exactly like the nbt random property such that `models.1.SaddleItem=exits:false` will be `nbt(SaddleItem,exists:false)`
- added boolean animation variable `is_paused` true when the game is paused
- added boolean animation variable `is_hovered` true when the client is looking at the entity or block entity position
- added an option in model debug settings to only render models in debug mode when the mob is hovered over
- added a setting to control whether EMF requires a 'base' model for model variation like OptiFine *(e.g. `pig2.jem` requires a `pig.jem` to work)*. This setting is now enabled by default to promote backwards compatibility and prevent confusion.
- tweaked the `keyframe()` & `keyframeloop()` animation functions to use catmulrom spline interpolation for smooth transitions between keyframes, factoring in the previous and upcoming frames
- fixed villager clothing and profession textures failing to render when a texture override is set in the model
- fixed an issue with `chest_large.jem` due to how it has to be split into 2 half models in game, this removes the log spam about the missing left/right half and also somewhat fixes animations referring to the opposite side of the chest, you are still highly recommended to keep the left and right half animations separate. A config option has been enabled to toggle this fix in case of modded chest model conflicts.
- fixed `slime_outer` models removing translucency when using texture overrides
- fixed `is_swinging_right_arm` and `is_swinging_left_arm`
- added `is_using_item` true when any item is being used, usually you can detect which arm via `is_swinging_right_arm` and `is_swinging_left_arm` but this is not reliable for all item usages
- added `is_holding_item_right` and `is_holding_item_left` to detect if the entity is holding an item in the right or left hand, may not work for all entities that hold items, only tested with players
- added vex charging to `is_aggressive` variable and also made it potentially more consistent with modded mobs
- fixed variation for special secondary or backup models, like `outer_armor.jem`. or old directory modded models.
- fixed the print animation methods accidentally printing during pre-validation
- signs and boats now have optional override models, based on how vanilla separates every sign and boat variant into its own models, these are only identifiable by enabling model creation logging and seeing what they are called there, and if absent will fallback to the optifine defaults.
- improved the file name and location displays in the config list of all models
- added the emf 16x logo to the config gui to replace the full logo
- improvements to texture overrides, emf now strips redundant texture declarations to improve runtime efficiency *(e.g. ignores `pig.png` declared in `pig.jem` as its redundant)*
- fixed an issue with some entity animation values getting reset during entity feature layer rendering and not being restored correctly

[2.2]
- fixed forge 1.21 & 1.20.6 compat
- fixed issues when used with the Sodium 0.6 betas
- Added a setting to make EMF reset all the vanilla part transforms of player models well before every render.
- Only applies if custom models are present for the player.
- This is not the typical behaviour however with how many mods alter player animations
- this setting vastly reduces the difficulty of player animation compatibility between mods and animation packs.
- E.G. player emote mods.
- This compatibility still requires work on the pack makers end.
- added the `nbt(key,test)` boolean animation function it works exactly like the nbt random property such that `models.1.SaddleItem=exits:false` will be `nbt(SaddleItem,exists:false)`
- added boolean animation variable `is_paused` true when the game is paused
- added boolean animation variable `is_hovered` true when the client is looking at the entity or block entity position
- added an option in model debug settings to only render models in debug mode when the mob is hovered over
- added a setting to control whether EMF requires a 'base' model for model variation like OptiFine *(e.g. `pig2.jem` requires a `pig.jem` to work)*. This setting is now enabled by default to promote backwards compatibility and prevent confusion.
- tweaked the `keyframe()` & `keyframeloop()` animation functions to use catmulrom spline interpolation for smooth transitions between keyframes, factoring in the previous and upcoming frames
- fixed villager clothing and profession textures failing to render when a texture override is set in the model
- fixed an issue with `chest_large.jem` due to how it has to be split into 2 half models in game, this removes the log spam about the missing left/right half and also somewhat fixes animations referring to the opposite side of the chest, you are still highly recommended to keep the left and right half animations separate. A config option has been enabled to toggle this fix in case of modded chest model conflicts.
- fixed `slime_outer` models removing translucency when using texture overrides
- fixed `is_swinging_right_arm` and `is_swinging_left_arm`
- added `is_using_item` true when any item is being used, usually you can detect which arm via `is_swinging_right_arm` and `is_swinging_left_arm` but this is not reliable for all item usages
- added `is_holding_item_right` and `is_holding_item_left` to detect if the entity is holding an item in the right or left hand, may not work for all entities that hold items, only tested with players
- added vex charging to `is_aggressive` variable and also made it potentially more consistent with modded mobs
- fixed variation for special secondary or backup models, like `outer_armor.jem`. or old directory modded models.
- fixed the print animation methods accidentally printing during pre-validation
- signs and boats now have optional override models, based on how vanilla separates every sign and boat variant into its own models, these are only identifiable by enabling model creation logging and seeing what they are called there, and if absent will fallback to the optifine defaults.
- improved the file name and location displays in the config list of all models
- added the emf 16x logo to the config gui to replace the full logo
- improvements to texture overrides, emf now strips redundant texture declarations to improve runtime efficiency *(e.g. ignores `pig.png` declared in `pig.jem` as its redundant)*
- fixed an issue with some entity animation values getting reset during entity feature layer rendering and not being restored correctly

[2.2]
- fixed forge 1.21 & 1.20.6 compat
- fixed issues when used with the Sodium 0.6 betas
- Added a setting to make EMF reset all the vanilla part transforms of player models well before every render.
- Only applies if custom models are present for the player.
- This is not the typical behaviour however with how many mods alter player animations
- this setting vastly reduces the difficulty of player animation compatibility between mods and animation packs.
- E.G. player emote mods.
- This compatibility still requires work on the pack makers end.
- added the `nbt(key,test)` boolean animation function it works exactly like the nbt random property such that `models.1.SaddleItem=exits:false` will be `nbt(SaddleItem,exists:false)`
- added boolean animation variable `is_paused` true when the game is paused
- added boolean animation variable `is_hovered` true when the client is looking at the entity or block entity position
- added an option in model debug settings to only render models in debug mode when the mob is hovered over
- added a setting to control whether EMF requires a 'base' model for model variation like OptiFine *(e.g. `pig2.jem` requires a `pig.jem` to work)*. This setting is now enabled by default to promote backwards compatibility and prevent confusion.
- tweaked the `keyframe()` & `keyframeloop()` animation functions to use catmulrom spline interpolation for smooth transitions between keyframes, factoring in the previous and upcoming frames
- fixed villager clothing and profession textures failing to render when a texture override is set in the model
- fixed an issue with `chest_large.jem` due to how it has to be split into 2 half models in game, this removes the log spam about the missing left/right half and also somewhat fixes animations referring to the opposite side of the chest, you are still highly recommended to keep the left and right half animations separate. A config option has been enabled to toggle this fix in case of modded chest model conflicts.
- fixed `slime_outer` models removing translucency when using texture overrides
- fixed `is_swinging_right_arm` and `is_swinging_left_arm`
- added `is_using_item` true when any item is being used, usually you can detect which arm via `is_swinging_right_arm` and `is_swinging_left_arm` but this is not reliable for all item usages
- added `is_holding_item_right` and `is_holding_item_left` to detect if the entity is holding an item in the right or left hand, may not work for all entities that hold items, only tested with players
- added vex charging to `is_aggressive` variable and also made it potentially more consistent with modded mobs
- fixed variation for special secondary or backup models, like `outer_armor.jem`. or old directory modded models.
- fixed the print animation methods accidentally printing during pre-validation
- signs and boats now have optional override models, based on how vanilla separates every sign and boat variant into its own models, these are only identifiable by enabling model creation logging and seeing what they are called there, and if absent will fallback to the optifine defaults.
- improved the file name and location displays in the config list of all models
- added the emf 16x logo to the config gui to replace the full logo
- improvements to texture overrides, emf now strips redundant texture declarations to improve runtime efficiency *(e.g. ignores `pig.png` declared in `pig.jem` as its redundant)*
- fixed an issue with some entity animation values getting reset during entity feature layer rendering and not being restored correctly

fixed a crash when holding certain entity renderers with custom models.

fixed a crash when holding certain entity renderers with custom models.

fixed a crash when holding certain entity renderers with custom models.

fixed a crash when holding certain entity renderers with custom models.

fixed a crash when holding certain entity renderers with custom models.

fixed a crash when holding certain entity renderers with custom models.

fixed a crash when holding certain entity renderers with custom models.

fixed a crash when holding certain entity renderers with custom models.

fixed a crash when holding certain entity renderers with custom models.

fixed a crash when holding certain entity renderers with custom models.

fixed a crash when holding certain entity renderers with custom models.

fixed a crash when holding certain entity renderers with custom models.

[2.1.2]
- fixed the player shadows not animating in first person with iris with custom player models
- fixed a crash when holding tridents, chests, and other custom entity models with texture overrides.

[2.1.2]
- fixed the player shadows not animating in first person with iris with custom player models
- fixed a crash when holding tridents, chests, and other custom entity models with texture overrides.

[2.1.2]
- fixed the player shadows not animating in first person with iris with custom player models
- fixed a crash when holding tridents, chests, and other custom entity models with texture overrides.

[2.1.2]
- fixed the player shadows not animating in first person with iris with custom player models
- fixed a crash when holding tridents, chests, and other custom entity models with texture overrides.

[2.1.2]
- fixed the player shadows not animating in first person with iris with custom player models
- fixed a crash when holding tridents, chests, and other custom entity models with texture overrides.

[2.1.2]
- fixed the player shadows not animating in first person with iris with custom player models
- fixed a crash when holding tridents, chests, and other custom entity models with texture overrides.

[2.1.2]
- fixed the player shadows not animating in first person with iris with custom player models
- fixed a crash when holding tridents, chests, and other custom entity models with texture overrides.

[2.1.2]
- fixed the player shadows not animating in first person with iris with custom player models
- fixed a crash when holding tridents, chests, and other custom entity models with texture overrides.

[2.1.2]
- fixed the player shadows not animating in first person with iris with custom player models
- fixed a crash when holding tridents, chests, and other custom entity models with texture overrides.

[2.1.2]
- fixed the player shadows not animating in first person with iris with custom player models
- fixed a crash when holding tridents, chests, and other custom entity models with texture overrides.

[2.1.2]
- fixed the player shadows not animating in first person with iris with custom player models
- fixed a crash when holding tridents, chests, and other custom entity models with texture overrides.

[2.1.2]
- fixed the player shadows not animating in first person with iris with custom player models
- fixed a crash when holding tridents, chests, and other custom entity models with texture overrides.

[2.1.1]
- now requires ETF 6.1.3 or newer
- added new EMFAnimationAPI methods to allow other mods to:
- pause/resume entire custom model animations for an entity
- pause/resume individual custom model parts from animations for an entity
- lock/unlock an entity to only use their vanilla models
- utility methods to cast Entity and BlockEntity into the EMFEntity interface
these will allow other mods to inhibit EMF animations and models for specific entities when required e.g. for emotes
- fixed EMF applying values to the last part with the given id as opposed to the first *(OptiFine parity)*
- fixed the `scale` model part default setting not correctly applying on mobs with new format animations like wardens & frogs
- fixed a crash when exporting models in 1.21
- fixed a `not building` crash in 1.21
- fixed the `root` part not appearing in model exports
- fixed a bug where item attachments could carry over to other mob renders
- fixed the ender dragon `spine` part not rendering when having a texture override
- the setting that allows EMF to disable EBE settings, when custom block entity models are loaded, now has a much more verbose and informative display in the EMF config warning screen
- fixed the modded model export log using the old `modded` directory format, the export log now also gives a full path for the jem starting from the assets folder
- model exports are now placed inside the `emf/export/assets/` folder in the `.minecraft` directory with a fully correct and namespaced path starting from the assets folder
- fixed the vanilla banner model waving adding on top of EMF animations due to vanilla banners being rendered in multiple stages
- changed `pi` from 3.1415926 to 3.1415927 to match vanilla pi usage and seems to match OptiFine despite the docs
- changed various math methods such as `sin() & cos()` to no longer use java.lang.Math and instead use Minecraft internal math class
- the above 2 changes fixed vindicators in fa 1.9.1
- added support for `inner_armor.jem` & `outer_armor.jem` as fallbacks if an entity specific armor model is not found, e.g. `zombie_inner_armor.jem` & `zombie_outer_armor.jem`
- fixed some missing mobs support for the `is_aggressive` variable
- changed the `height_above_ground` variable to detect blocks with standable top surfaces not just solid blocks
- fixed a bug causing some block entity model texture overrides to appear in first person view in their iris shader shadow pass position
- added an optimization option that will skip recalculating entity model animations during the iris shadow pass, on by default, and should always stay on, it is only an option in case of future breaking iris api changes or weird behaviour with iris ports.
- fixed the trident model part declaring additional parts in the OptiFine mapping by accident, which could cause vanilla trident parts to re-appear in many custom trident models

[2.1.1]
- now requires ETF 6.1.3 or newer
- added new EMFAnimationAPI methods to allow other mods to:
- pause/resume entire custom model animations for an entity
- pause/resume individual custom model parts from animations for an entity
- lock/unlock an entity to only use their vanilla models
- utility methods to cast Entity and BlockEntity into the EMFEntity interface
these will allow other mods to inhibit EMF animations and models for specific entities when required e.g. for emotes
- fixed EMF applying values to the last part with the given id as opposed to the first *(OptiFine parity)*
- fixed the `scale` model part default setting not correctly applying on mobs with new format animations like wardens & frogs
- fixed a crash when exporting models in 1.21
- fixed a `not building` crash in 1.21
- fixed the `root` part not appearing in model exports
- fixed a bug where item attachments could carry over to other mob renders
- fixed the ender dragon `spine` part not rendering when having a texture override
- the setting that allows EMF to disable EBE settings, when custom block entity models are loaded, now has a much more verbose and informative display in the EMF config warning screen
- fixed the modded model export log using the old `modded` directory format, the export log now also gives a full path for the jem starting from the assets folder
- model exports are now placed inside the `emf/export/assets/` folder in the `.minecraft` directory with a fully correct and namespaced path starting from the assets folder
- fixed the vanilla banner model waving adding on top of EMF animations due to vanilla banners being rendered in multiple stages
- changed `pi` from 3.1415926 to 3.1415927 to match vanilla pi usage and seems to match OptiFine despite the docs
- changed various math methods such as `sin() & cos()` to no longer use java.lang.Math and instead use Minecraft internal math class
- the above 2 changes fixed vindicators in fa 1.9.1
- added support for `inner_armor.jem` & `outer_armor.jem` as fallbacks if an entity specific armor model is not found, e.g. `zombie_inner_armor.jem` & `zombie_outer_armor.jem`
- fixed some missing mobs support for the `is_aggressive` variable
- changed the `height_above_ground` variable to detect blocks with standable top surfaces not just solid blocks
- fixed a bug causing some block entity model texture overrides to appear in first person view in their iris shader shadow pass position
- added an optimization option that will skip recalculating entity model animations during the iris shadow pass, on by default, and should always stay on, it is only an option in case of future breaking iris api changes or weird behaviour with iris ports.
- fixed the trident model part declaring additional parts in the OptiFine mapping by accident, which could cause vanilla trident parts to re-appear in many custom trident models

[2.1.1]
- now requires ETF 6.1.3 or newer
- added new EMFAnimationAPI methods to allow other mods to:
- pause/resume entire custom model animations for an entity
- pause/resume individual custom model parts from animations for an entity
- lock/unlock an entity to only use their vanilla models
- utility methods to cast Entity and BlockEntity into the EMFEntity interface
these will allow other mods to inhibit EMF animations and models for specific entities when required e.g. for emotes
- fixed EMF applying values to the last part with the given id as opposed to the first *(OptiFine parity)*
- fixed the `scale` model part default setting not correctly applying on mobs with new format animations like wardens & frogs
- fixed a crash when exporting models in 1.21
- fixed a `not building` crash in 1.21
- fixed the `root` part not appearing in model exports
- fixed a bug where item attachments could carry over to other mob renders
- fixed the ender dragon `spine` part not rendering when having a texture override
- the setting that allows EMF to disable EBE settings, when custom block entity models are loaded, now has a much more verbose and informative display in the EMF config warning screen
- fixed the modded model export log using the old `modded` directory format, the export log now also gives a full path for the jem starting from the assets folder
- model exports are now placed inside the `emf/export/assets/` folder in the `.minecraft` directory with a fully correct and namespaced path starting from the assets folder
- fixed the vanilla banner model waving adding on top of EMF animations due to vanilla banners being rendered in multiple stages
- changed `pi` from 3.1415926 to 3.1415927 to match vanilla pi usage and seems to match OptiFine despite the docs
- changed various math methods such as `sin() & cos()` to no longer use java.lang.Math and instead use Minecraft internal math class
- the above 2 changes fixed vindicators in fa 1.9.1
- added support for `inner_armor.jem` & `outer_armor.jem` as fallbacks if an entity specific armor model is not found, e.g. `zombie_inner_armor.jem` & `zombie_outer_armor.jem`
- fixed some missing mobs support for the `is_aggressive` variable
- changed the `height_above_ground` variable to detect blocks with standable top surfaces not just solid blocks
- fixed a bug causing some block entity model texture overrides to appear in first person view in their iris shader shadow pass position
- added an optimization option that will skip recalculating entity model animations during the iris shadow pass, on by default, and should always stay on, it is only an option in case of future breaking iris api changes or weird behaviour with iris ports.
- fixed the trident model part declaring additional parts in the OptiFine mapping by accident, which could cause vanilla trident parts to re-appear in many custom trident models

[2.1.1]
- now requires ETF 6.1.3 or newer
- added new EMFAnimationAPI methods to allow other mods to:
- pause/resume entire custom model animations for an entity
- pause/resume individual custom model parts from animations for an entity
- lock/unlock an entity to only use their vanilla models
- utility methods to cast Entity and BlockEntity into the EMFEntity interface
these will allow other mods to inhibit EMF animations and models for specific entities when required e.g. for emotes
- fixed EMF applying values to the last part with the given id as opposed to the first *(OptiFine parity)*
- fixed the `scale` model part default setting not correctly applying on mobs with new format animations like wardens & frogs
- fixed a crash when exporting models in 1.21
- fixed a `not building` crash in 1.21
- fixed the `root` part not appearing in model exports
- fixed a bug where item attachments could carry over to other mob renders
- fixed the ender dragon `spine` part not rendering when having a texture override
- the setting that allows EMF to disable EBE settings, when custom block entity models are loaded, now has a much more verbose and informative display in the EMF config warning screen
- fixed the modded model export log using the old `modded` directory format, the export log now also gives a full path for the jem starting from the assets folder
- model exports are now placed inside the `emf/export/assets/` folder in the `.minecraft` directory with a fully correct and namespaced path starting from the assets folder
- fixed the vanilla banner model waving adding on top of EMF animations due to vanilla banners being rendered in multiple stages
- changed `pi` from 3.1415926 to 3.1415927 to match vanilla pi usage and seems to match OptiFine despite the docs
- changed various math methods such as `sin() & cos()` to no longer use java.lang.Math and instead use Minecraft internal math class
- the above 2 changes fixed vindicators in fa 1.9.1
- added support for `inner_armor.jem` & `outer_armor.jem` as fallbacks if an entity specific armor model is not found, e.g. `zombie_inner_armor.jem` & `zombie_outer_armor.jem`
- fixed some missing mobs support for the `is_aggressive` variable
- changed the `height_above_ground` variable to detect blocks with standable top surfaces not just solid blocks
- fixed a bug causing some block entity model texture overrides to appear in first person view in their iris shader shadow pass position
- added an optimization option that will skip recalculating entity model animations during the iris shadow pass, on by default, and should always stay on, it is only an option in case of future breaking iris api changes or weird behaviour with iris ports.
- fixed the trident model part declaring additional parts in the OptiFine mapping by accident, which could cause vanilla trident parts to re-appear in many custom trident models

[2.1.1]
- now requires ETF 6.1.3 or newer
- added new EMFAnimationAPI methods to allow other mods to:
- pause/resume entire custom model animations for an entity
- pause/resume individual custom model parts from animations for an entity
- lock/unlock an entity to only use their vanilla models
- utility methods to cast Entity and BlockEntity into the EMFEntity interface
these will allow other mods to inhibit EMF animations and models for specific entities when required e.g. for emotes
- fixed EMF applying values to the last part with the given id as opposed to the first *(OptiFine parity)*
- fixed the `scale` model part default setting not correctly applying on mobs with new format animations like wardens & frogs
- fixed a crash when exporting models in 1.21
- fixed a `not building` crash in 1.21
- fixed the `root` part not appearing in model exports
- fixed a bug where item attachments could carry over to other mob renders
- fixed the ender dragon `spine` part not rendering when having a texture override
- the setting that allows EMF to disable EBE settings, when custom block entity models are loaded, now has a much more verbose and informative display in the EMF config warning screen
- fixed the modded model export log using the old `modded` directory format, the export log now also gives a full path for the jem starting from the assets folder
- model exports are now placed inside the `emf/export/assets/` folder in the `.minecraft` directory with a fully correct and namespaced path starting from the assets folder
- fixed the vanilla banner model waving adding on top of EMF animations due to vanilla banners being rendered in multiple stages
- changed `pi` from 3.1415926 to 3.1415927 to match vanilla pi usage and seems to match OptiFine despite the docs
- changed various math methods such as `sin() & cos()` to no longer use java.lang.Math and instead use Minecraft internal math class
- the above 2 changes fixed vindicators in fa 1.9.1
- added support for `inner_armor.jem` & `outer_armor.jem` as fallbacks if an entity specific armor model is not found, e.g. `zombie_inner_armor.jem` & `zombie_outer_armor.jem`
- fixed some missing mobs support for the `is_aggressive` variable
- changed the `height_above_ground` variable to detect blocks with standable top surfaces not just solid blocks
- fixed a bug causing some block entity model texture overrides to appear in first person view in their iris shader shadow pass position
- added an optimization option that will skip recalculating entity model animations during the iris shadow pass, on by default, and should always stay on, it is only an option in case of future breaking iris api changes or weird behaviour with iris ports.
- fixed the trident model part declaring additional parts in the OptiFine mapping by accident, which could cause vanilla trident parts to re-appear in many custom trident models

[2.1.1]
- now requires ETF 6.1.3 or newer
- added new EMFAnimationAPI methods to allow other mods to:
- pause/resume entire custom model animations for an entity
- pause/resume individual custom model parts from animations for an entity
- lock/unlock an entity to only use their vanilla models
- utility methods to cast Entity and BlockEntity into the EMFEntity interface
these will allow other mods to inhibit EMF animations and models for specific entities when required e.g. for emotes
- fixed EMF applying values to the last part with the given id as opposed to the first *(OptiFine parity)*
- fixed the `scale` model part default setting not correctly applying on mobs with new format animations like wardens & frogs
- fixed a crash when exporting models in 1.21
- fixed a `not building` crash in 1.21
- fixed the `root` part not appearing in model exports
- fixed a bug where item attachments could carry over to other mob renders
- fixed the ender dragon `spine` part not rendering when having a texture override
- the setting that allows EMF to disable EBE settings, when custom block entity models are loaded, now has a much more verbose and informative display in the EMF config warning screen
- fixed the modded model export log using the old `modded` directory format, the export log now also gives a full path for the jem starting from the assets folder
- model exports are now placed inside the `emf/export/assets/` folder in the `.minecraft` directory with a fully correct and namespaced path starting from the assets folder
- fixed the vanilla banner model waving adding on top of EMF animations due to vanilla banners being rendered in multiple stages
- changed `pi` from 3.1415926 to 3.1415927 to match vanilla pi usage and seems to match OptiFine despite the docs
- changed various math methods such as `sin() & cos()` to no longer use java.lang.Math and instead use Minecraft internal math class
- the above 2 changes fixed vindicators in fa 1.9.1
- added support for `inner_armor.jem` & `outer_armor.jem` as fallbacks if an entity specific armor model is not found, e.g. `zombie_inner_armor.jem` & `zombie_outer_armor.jem`
- fixed some missing mobs support for the `is_aggressive` variable
- changed the `height_above_ground` variable to detect blocks with standable top surfaces not just solid blocks
- fixed a bug causing some block entity model texture overrides to appear in first person view in their iris shader shadow pass position
- added an optimization option that will skip recalculating entity model animations during the iris shadow pass, on by default, and should always stay on, it is only an option in case of future breaking iris api changes or weird behaviour with iris ports.
- fixed the trident model part declaring additional parts in the OptiFine mapping by accident, which could cause vanilla trident parts to re-appear in many custom trident models

[2.1.1]
- now requires ETF 6.1.3 or newer
- added new EMFAnimationAPI methods to allow other mods to:
- pause/resume entire custom model animations for an entity
- pause/resume individual custom model parts from animations for an entity
- lock/unlock an entity to only use their vanilla models
- utility methods to cast Entity and BlockEntity into the EMFEntity interface
these will allow other mods to inhibit EMF animations and models for specific entities when required e.g. for emotes
- fixed EMF applying values to the last part with the given id as opposed to the first *(OptiFine parity)*
- fixed the `scale` model part default setting not correctly applying on mobs with new format animations like wardens & frogs
- fixed a crash when exporting models in 1.21
- fixed a `not building` crash in 1.21
- fixed the `root` part not appearing in model exports
- fixed a bug where item attachments could carry over to other mob renders
- fixed the ender dragon `spine` part not rendering when having a texture override
- the setting that allows EMF to disable EBE settings, when custom block entity models are loaded, now has a much more verbose and informative display in the EMF config warning screen
- fixed the modded model export log using the old `modded` directory format, the export log now also gives a full path for the jem starting from the assets folder
- model exports are now placed inside the `emf/export/assets/` folder in the `.minecraft` directory with a fully correct and namespaced path starting from the assets folder
- fixed the vanilla banner model waving adding on top of EMF animations due to vanilla banners being rendered in multiple stages
- changed `pi` from 3.1415926 to 3.1415927 to match vanilla pi usage and seems to match OptiFine despite the docs
- changed various math methods such as `sin() & cos()` to no longer use java.lang.Math and instead use Minecraft internal math class
- the above 2 changes fixed vindicators in fa 1.9.1
- added support for `inner_armor.jem` & `outer_armor.jem` as fallbacks if an entity specific armor model is not found, e.g. `zombie_inner_armor.jem` & `zombie_outer_armor.jem`
- fixed some missing mobs support for the `is_aggressive` variable
- changed the `height_above_ground` variable to detect blocks with standable top surfaces not just solid blocks
- fixed a bug causing some block entity model texture overrides to appear in first person view in their iris shader shadow pass position
- added an optimization option that will skip recalculating entity model animations during the iris shadow pass, on by default, and should always stay on, it is only an option in case of future breaking iris api changes or weird behaviour with iris ports.
- fixed the trident model part declaring additional parts in the OptiFine mapping by accident, which could cause vanilla trident parts to re-appear in many custom trident models

[2.1.1]
- now requires ETF 6.1.3 or newer
- added new EMFAnimationAPI methods to allow other mods to:
- pause/resume entire custom model animations for an entity
- pause/resume individual custom model parts from animations for an entity
- lock/unlock an entity to only use their vanilla models
- utility methods to cast Entity and BlockEntity into the EMFEntity interface
these will allow other mods to inhibit EMF animations and models for specific entities when required e.g. for emotes
- fixed EMF applying values to the last part with the given id as opposed to the first *(OptiFine parity)*
- fixed the `scale` model part default setting not correctly applying on mobs with new format animations like wardens & frogs
- fixed a crash when exporting models in 1.21
- fixed a `not building` crash in 1.21
- fixed the `root` part not appearing in model exports
- fixed a bug where item attachments could carry over to other mob renders
- fixed the ender dragon `spine` part not rendering when having a texture override
- the setting that allows EMF to disable EBE settings, when custom block entity models are loaded, now has a much more verbose and informative display in the EMF config warning screen
- fixed the modded model export log using the old `modded` directory format, the export log now also gives a full path for the jem starting from the assets folder
- model exports are now placed inside the `emf/export/assets/` folder in the `.minecraft` directory with a fully correct and namespaced path starting from the assets folder
- fixed the vanilla banner model waving adding on top of EMF animations due to vanilla banners being rendered in multiple stages
- changed `pi` from 3.1415926 to 3.1415927 to match vanilla pi usage and seems to match OptiFine despite the docs
- changed various math methods such as `sin() & cos()` to no longer use java.lang.Math and instead use Minecraft internal math class
- the above 2 changes fixed vindicators in fa 1.9.1
- added support for `inner_armor.jem` & `outer_armor.jem` as fallbacks if an entity specific armor model is not found, e.g. `zombie_inner_armor.jem` & `zombie_outer_armor.jem`
- fixed some missing mobs support for the `is_aggressive` variable
- changed the `height_above_ground` variable to detect blocks with standable top surfaces not just solid blocks
- fixed a bug causing some block entity model texture overrides to appear in first person view in their iris shader shadow pass position
- added an optimization option that will skip recalculating entity model animations during the iris shadow pass, on by default, and should always stay on, it is only an option in case of future breaking iris api changes or weird behaviour with iris ports.
- fixed the trident model part declaring additional parts in the OptiFine mapping by accident, which could cause vanilla trident parts to re-appear in many custom trident models

[2.1.1]
- now requires ETF 6.1.3 or newer
- added new EMFAnimationAPI methods to allow other mods to:
- pause/resume entire custom model animations for an entity
- pause/resume individual custom model parts from animations for an entity
- lock/unlock an entity to only use their vanilla models
- utility methods to cast Entity and BlockEntity into the EMFEntity interface
these will allow other mods to inhibit EMF animations and models for specific entities when required e.g. for emotes
- fixed EMF applying values to the last part with the given id as opposed to the first *(OptiFine parity)*
- fixed the `scale` model part default setting not correctly applying on mobs with new format animations like wardens & frogs
- fixed a crash when exporting models in 1.21
- fixed a `not building` crash in 1.21
- fixed the `root` part not appearing in model exports
- fixed a bug where item attachments could carry over to other mob renders
- fixed the ender dragon `spine` part not rendering when having a texture override
- the setting that allows EMF to disable EBE settings, when custom block entity models are loaded, now has a much more verbose and informative display in the EMF config warning screen
- fixed the modded model export log using the old `modded` directory format, the export log now also gives a full path for the jem starting from the assets folder
- model exports are now placed inside the `emf/export/assets/` folder in the `.minecraft` directory with a fully correct and namespaced path starting from the assets folder
- fixed the vanilla banner model waving adding on top of EMF animations due to vanilla banners being rendered in multiple stages
- changed `pi` from 3.1415926 to 3.1415927 to match vanilla pi usage and seems to match OptiFine despite the docs
- changed various math methods such as `sin() & cos()` to no longer use java.lang.Math and instead use Minecraft internal math class
- the above 2 changes fixed vindicators in fa 1.9.1
- added support for `inner_armor.jem` & `outer_armor.jem` as fallbacks if an entity specific armor model is not found, e.g. `zombie_inner_armor.jem` & `zombie_outer_armor.jem`
- fixed some missing mobs support for the `is_aggressive` variable
- changed the `height_above_ground` variable to detect blocks with standable top surfaces not just solid blocks
- fixed a bug causing some block entity model texture overrides to appear in first person view in their iris shader shadow pass position
- added an optimization option that will skip recalculating entity model animations during the iris shadow pass, on by default, and should always stay on, it is only an option in case of future breaking iris api changes or weird behaviour with iris ports.
- fixed the trident model part declaring additional parts in the OptiFine mapping by accident, which could cause vanilla trident parts to re-appear in many custom trident models

[2.1.1]
- now requires ETF 6.1.3 or newer
- added new EMFAnimationAPI methods to allow other mods to:
- pause/resume entire custom model animations for an entity
- pause/resume individual custom model parts from animations for an entity
- lock/unlock an entity to only use their vanilla models
- utility methods to cast Entity and BlockEntity into the EMFEntity interface
these will allow other mods to inhibit EMF animations and models for specific entities when required e.g. for emotes
- fixed EMF applying values to the last part with the given id as opposed to the first *(OptiFine parity)*
- fixed the `scale` model part default setting not correctly applying on mobs with new format animations like wardens & frogs
- fixed a crash when exporting models in 1.21
- fixed a `not building` crash in 1.21
- fixed the `root` part not appearing in model exports
- fixed a bug where item attachments could carry over to other mob renders
- fixed the ender dragon `spine` part not rendering when having a texture override
- the setting that allows EMF to disable EBE settings, when custom block entity models are loaded, now has a much more verbose and informative display in the EMF config warning screen
- fixed the modded model export log using the old `modded` directory format, the export log now also gives a full path for the jem starting from the assets folder
- model exports are now placed inside the `emf/export/assets/` folder in the `.minecraft` directory with a fully correct and namespaced path starting from the assets folder
- fixed the vanilla banner model waving adding on top of EMF animations due to vanilla banners being rendered in multiple stages
- changed `pi` from 3.1415926 to 3.1415927 to match vanilla pi usage and seems to match OptiFine despite the docs
- changed various math methods such as `sin() & cos()` to no longer use java.lang.Math and instead use Minecraft internal math class
- the above 2 changes fixed vindicators in fa 1.9.1
- added support for `inner_armor.jem` & `outer_armor.jem` as fallbacks if an entity specific armor model is not found, e.g. `zombie_inner_armor.jem` & `zombie_outer_armor.jem`
- fixed some missing mobs support for the `is_aggressive` variable
- changed the `height_above_ground` variable to detect blocks with standable top surfaces not just solid blocks
- fixed a bug causing some block entity model texture overrides to appear in first person view in their iris shader shadow pass position
- added an optimization option that will skip recalculating entity model animations during the iris shadow pass, on by default, and should always stay on, it is only an option in case of future breaking iris api changes or weird behaviour with iris ports.
- fixed the trident model part declaring additional parts in the OptiFine mapping by accident, which could cause vanilla trident parts to re-appear in many custom trident models

[2.1.1]
- now requires ETF 6.1.3 or newer
- added new EMFAnimationAPI methods to allow other mods to:
- pause/resume entire custom model animations for an entity
- pause/resume individual custom model parts from animations for an entity
- lock/unlock an entity to only use their vanilla models
- utility methods to cast Entity and BlockEntity into the EMFEntity interface
these will allow other mods to inhibit EMF animations and models for specific entities when required e.g. for emotes
- fixed EMF applying values to the last part with the given id as opposed to the first *(OptiFine parity)*
- fixed the `scale` model part default setting not correctly applying on mobs with new format animations like wardens & frogs
- fixed a crash when exporting models in 1.21
- fixed a `not building` crash in 1.21
- fixed the `root` part not appearing in model exports
- fixed a bug where item attachments could carry over to other mob renders
- fixed the ender dragon `spine` part not rendering when having a texture override
- the setting that allows EMF to disable EBE settings, when custom block entity models are loaded, now has a much more verbose and informative display in the EMF config warning screen
- fixed the modded model export log using the old `modded` directory format, the export log now also gives a full path for the jem starting from the assets folder
- model exports are now placed inside the `emf/export/assets/` folder in the `.minecraft` directory with a fully correct and namespaced path starting from the assets folder
- fixed the vanilla banner model waving adding on top of EMF animations due to vanilla banners being rendered in multiple stages
- changed `pi` from 3.1415926 to 3.1415927 to match vanilla pi usage and seems to match OptiFine despite the docs
- changed various math methods such as `sin() & cos()` to no longer use java.lang.Math and instead use Minecraft internal math class
- the above 2 changes fixed vindicators in fa 1.9.1
- added support for `inner_armor.jem` & `outer_armor.jem` as fallbacks if an entity specific armor model is not found, e.g. `zombie_inner_armor.jem` & `zombie_outer_armor.jem`
- fixed some missing mobs support for the `is_aggressive` variable
- changed the `height_above_ground` variable to detect blocks with standable top surfaces not just solid blocks
- fixed a bug causing some block entity model texture overrides to appear in first person view in their iris shader shadow pass position
- added an optimization option that will skip recalculating entity model animations during the iris shadow pass, on by default, and should always stay on, it is only an option in case of future breaking iris api changes or weird behaviour with iris ports.
- fixed the trident model part declaring additional parts in the OptiFine mapping by accident, which could cause vanilla trident parts to re-appear in many custom trident models

[2.1.1]
- now requires ETF 6.1.3 or newer
- added new EMFAnimationAPI methods to allow other mods to:
- pause/resume entire custom model animations for an entity
- pause/resume individual custom model parts from animations for an entity
- lock/unlock an entity to only use their vanilla models
- utility methods to cast Entity and BlockEntity into the EMFEntity interface
these will allow other mods to inhibit EMF animations and models for specific entities when required e.g. for emotes
- fixed EMF applying values to the last part with the given id as opposed to the first *(OptiFine parity)*
- fixed the `scale` model part default setting not correctly applying on mobs with new format animations like wardens & frogs
- fixed a crash when exporting models in 1.21
- fixed a `not building` crash in 1.21
- fixed the `root` part not appearing in model exports
- fixed a bug where item attachments could carry over to other mob renders
- fixed the ender dragon `spine` part not rendering when having a texture override
- the setting that allows EMF to disable EBE settings, when custom block entity models are loaded, now has a much more verbose and informative display in the EMF config warning screen
- fixed the modded model export log using the old `modded` directory format, the export log now also gives a full path for the jem starting from the assets folder
- model exports are now placed inside the `emf/export/assets/` folder in the `.minecraft` directory with a fully correct and namespaced path starting from the assets folder
- fixed the vanilla banner model waving adding on top of EMF animations due to vanilla banners being rendered in multiple stages
- changed `pi` from 3.1415926 to 3.1415927 to match vanilla pi usage and seems to match OptiFine despite the docs
- changed various math methods such as `sin() & cos()` to no longer use java.lang.Math and instead use Minecraft internal math class
- the above 2 changes fixed vindicators in fa 1.9.1
- added support for `inner_armor.jem` & `outer_armor.jem` as fallbacks if an entity specific armor model is not found, e.g. `zombie_inner_armor.jem` & `zombie_outer_armor.jem`
- fixed some missing mobs support for the `is_aggressive` variable
- changed the `height_above_ground` variable to detect blocks with standable top surfaces not just solid blocks
- fixed a bug causing some block entity model texture overrides to appear in first person view in their iris shader shadow pass position
- added an optimization option that will skip recalculating entity model animations during the iris shadow pass, on by default, and should always stay on, it is only an option in case of future breaking iris api changes or weird behaviour with iris ports.
- fixed the trident model part declaring additional parts in the OptiFine mapping by accident, which could cause vanilla trident parts to re-appear in many custom trident models

[2.1.1]
- now requires ETF 6.1.3 or newer
- added new EMFAnimationAPI methods to allow other mods to:
- pause/resume entire custom model animations for an entity
- pause/resume individual custom model parts from animations for an entity
- lock/unlock an entity to only use their vanilla models
- utility methods to cast Entity and BlockEntity into the EMFEntity interface
these will allow other mods to inhibit EMF animations and models for specific entities when required e.g. for emotes
- fixed EMF applying values to the last part with the given id as opposed to the first *(OptiFine parity)*
- fixed the `scale` model part default setting not correctly applying on mobs with new format animations like wardens & frogs
- fixed a crash when exporting models in 1.21
- fixed a `not building` crash in 1.21
- fixed the `root` part not appearing in model exports
- fixed a bug where item attachments could carry over to other mob renders
- fixed the ender dragon `spine` part not rendering when having a texture override
- the setting that allows EMF to disable EBE settings, when custom block entity models are loaded, now has a much more verbose and informative display in the EMF config warning screen
- fixed the modded model export log using the old `modded` directory format, the export log now also gives a full path for the jem starting from the assets folder
- model exports are now placed inside the `emf/export/assets/` folder in the `.minecraft` directory with a fully correct and namespaced path starting from the assets folder
- fixed the vanilla banner model waving adding on top of EMF animations due to vanilla banners being rendered in multiple stages
- changed `pi` from 3.1415926 to 3.1415927 to match vanilla pi usage and seems to match OptiFine despite the docs
- changed various math methods such as `sin() & cos()` to no longer use java.lang.Math and instead use Minecraft internal math class
- the above 2 changes fixed vindicators in fa 1.9.1
- added support for `inner_armor.jem` & `outer_armor.jem` as fallbacks if an entity specific armor model is not found, e.g. `zombie_inner_armor.jem` & `zombie_outer_armor.jem`
- fixed some missing mobs support for the `is_aggressive` variable
- changed the `height_above_ground` variable to detect blocks with standable top surfaces not just solid blocks
- fixed a bug causing some block entity model texture overrides to appear in first person view in their iris shader shadow pass position
- added an optimization option that will skip recalculating entity model animations during the iris shadow pass, on by default, and should always stay on, it is only an option in case of future breaking iris api changes or weird behaviour with iris ports.
- fixed the trident model part declaring additional parts in the OptiFine mapping by accident, which could cause vanilla trident parts to re-appear in many custom trident models

2.0.2
- fixed the first person hand settings not getting reset correctly in 2.0.1
- added the `is_swinging_right_arm` & `is_swinging_left_arm` boolean variables,
used to distinguish right and left arm swinging in biped models, if no arm is swinging both should be false, if `swing_progress > 0` then one of these should be true.
- added support for an optional `player_cape.jem` model file to be used for better animating the player cape
`player_cape.jem` only contains a `cloak` part, positioned exactly as it is in the regular `player.jem`,
if this model is present it will render in a special way that will not apply the vanilla animations to the cape.
Allowing much easier custom animations
*(note this jem file can not be exported by the EMF config, but the `player.jem` exported model will work perfectly for it, as of v2.0.2)*

The only transforms EMF applies to `player_cape.jem` before rendering & custom animating is:
- rotating the cape 180 degrees around the `y` axis. (matching vanilla)
- translating the cape 2 pixels backwards. (matching vanilla)
- translating the cape a further 1 pixel backwards & upwards if the player has a chest-plate on. (matching vanilla)

No other rotations or translations are applied to the cape, allowing for fully custom animations.

The `cloak` part inside the regular `player.jem` will render if `player_cape.jem` is not present, but will not benefit from having its vanilla animation cancelled by EMF

2.0.2
- fixed the first person hand settings not getting reset correctly in 2.0.1
- added the `is_swinging_right_arm` & `is_swinging_left_arm` boolean variables,
used to distinguish right and left arm swinging in biped models, if no arm is swinging both should be false, if `swing_progress > 0` then one of these should be true.
- added support for an optional `player_cape.jem` model file to be used for better animating the player cape
`player_cape.jem` only contains a `cloak` part, positioned exactly as it is in the regular `player.jem`,
if this model is present it will render in a special way that will not apply the vanilla animations to the cape.
Allowing much easier custom animations
*(note this jem file can not be exported by the EMF config, but the `player.jem` exported model will work perfectly for it, as of v2.0.2)*

The only transforms EMF applies to `player_cape.jem` before rendering & custom animating is:
- rotating the cape 180 degrees around the `y` axis. (matching vanilla)
- translating the cape 2 pixels backwards. (matching vanilla)
- translating the cape a further 1 pixel backwards & upwards if the player has a chest-plate on. (matching vanilla)

No other rotations or translations are applied to the cape, allowing for fully custom animations.

The `cloak` part inside the regular `player.jem` will render if `player_cape.jem` is not present, but will not benefit from having its vanilla animation cancelled by EMF

2.0.2
- fixed the first person hand settings not getting reset correctly in 2.0.1
- added the `is_swinging_right_arm` & `is_swinging_left_arm` boolean variables,
used to distinguish right and left arm swinging in biped models, if no arm is swinging both should be false, if `swing_progress > 0` then one of these should be true.
- added support for an optional `player_cape.jem` model file to be used for better animating the player cape
`player_cape.jem` only contains a `cloak` part, positioned exactly as it is in the regular `player.jem`,
if this model is present it will render in a special way that will not apply the vanilla animations to the cape.
Allowing much easier custom animations
*(note this jem file can not be exported by the EMF config, but the `player.jem` exported model will work perfectly for it, as of v2.0.2)*

The only transforms EMF applies to `player_cape.jem` before rendering & custom animating is:
- rotating the cape 180 degrees around the `y` axis. (matching vanilla)
- translating the cape 2 pixels backwards. (matching vanilla)
- translating the cape a further 1 pixel backwards & upwards if the player has a chest-plate on. (matching vanilla)

No other rotations or translations are applied to the cape, allowing for fully custom animations.

The `cloak` part inside the regular `player.jem` will render if `player_cape.jem` is not present, but will not benefit from having its vanilla animation cancelled by EMF

2.0.2
- fixed the first person hand settings not getting reset correctly in 2.0.1
- added the `is_swinging_right_arm` & `is_swinging_left_arm` boolean variables,
used to distinguish right and left arm swinging in biped models, if no arm is swinging both should be false, if `swing_progress > 0` then one of these should be true.
- added support for an optional `player_cape.jem` model file to be used for better animating the player cape
`player_cape.jem` only contains a `cloak` part, positioned exactly as it is in the regular `player.jem`,
if this model is present it will render in a special way that will not apply the vanilla animations to the cape.
Allowing much easier custom animations
*(note this jem file can not be exported by the EMF config, but the `player.jem` exported model will work perfectly for it, as of v2.0.2)*

The only transforms EMF applies to `player_cape.jem` before rendering & custom animating is:
- rotating the cape 180 degrees around the `y` axis. (matching vanilla)
- translating the cape 2 pixels backwards. (matching vanilla)
- translating the cape a further 1 pixel backwards & upwards if the player has a chest-plate on. (matching vanilla)

No other rotations or translations are applied to the cape, allowing for fully custom animations.

The `cloak` part inside the regular `player.jem` will render if `player_cape.jem` is not present, but will not benefit from having its vanilla animation cancelled by EMF

2.0.2
- fixed the first person hand settings not getting reset correctly in 2.0.1
- added the `is_swinging_right_arm` & `is_swinging_left_arm` boolean variables,
used to distinguish right and left arm swinging in biped models, if no arm is swinging both should be false, if `swing_progress > 0` then one of these should be true.
- added support for an optional `player_cape.jem` model file to be used for better animating the player cape
`player_cape.jem` only contains a `cloak` part, positioned exactly as it is in the regular `player.jem`,
if this model is present it will render in a special way that will not apply the vanilla animations to the cape.
Allowing much easier custom animations
*(note this jem file can not be exported by the EMF config, but the `player.jem` exported model will work perfectly for it, as of v2.0.2)*

The only transforms EMF applies to `player_cape.jem` before rendering & custom animating is:
- rotating the cape 180 degrees around the `y` axis. (matching vanilla)
- translating the cape 2 pixels backwards. (matching vanilla)
- translating the cape a further 1 pixel backwards & upwards if the player has a chest-plate on. (matching vanilla)

No other rotations or translations are applied to the cape, allowing for fully custom animations.

The `cloak` part inside the regular `player.jem` will render if `player_cape.jem` is not present, but will not benefit from having its vanilla animation cancelled by EMF

2.0.2
- fixed the first person hand settings not getting reset correctly in 2.0.1
- added the `is_swinging_right_arm` & `is_swinging_left_arm` boolean variables,
used to distinguish right and left arm swinging in biped models, if no arm is swinging both should be false, if `swing_progress > 0` then one of these should be true.
- added support for an optional `player_cape.jem` model file to be used for better animating the player cape
`player_cape.jem` only contains a `cloak` part, positioned exactly as it is in the regular `player.jem`,
if this model is present it will render in a special way that will not apply the vanilla animations to the cape.
Allowing much easier custom animations
*(note this jem file can not be exported by the EMF config, but the `player.jem` exported model will work perfectly for it, as of v2.0.2)*

The only transforms EMF applies to `player_cape.jem` before rendering & custom animating is:
- rotating the cape 180 degrees around the `y` axis. (matching vanilla)
- translating the cape 2 pixels backwards. (matching vanilla)
- translating the cape a further 1 pixel backwards & upwards if the player has a chest-plate on. (matching vanilla)

No other rotations or translations are applied to the cape, allowing for fully custom animations.

The `cloak` part inside the regular `player.jem` will render if `player_cape.jem` is not present, but will not benefit from having its vanilla animation cancelled by EMF

2.0.2
- fixed the first person hand settings not getting reset correctly in 2.0.1
- added the `is_swinging_right_arm` & `is_swinging_left_arm` boolean variables,
used to distinguish right and left arm swinging in biped models, if no arm is swinging both should be false, if `swing_progress > 0` then one of these should be true.
- added support for an optional `player_cape.jem` model file to be used for better animating the player cape
`player_cape.jem` only contains a `cloak` part, positioned exactly as it is in the regular `player.jem`,
if this model is present it will render in a special way that will not apply the vanilla animations to the cape.
Allowing much easier custom animations
*(note this jem file can not be exported by the EMF config, but the `player.jem` exported model will work perfectly for it, as of v2.0.2)*

The only transforms EMF applies to `player_cape.jem` before rendering & custom animating is:
- rotating the cape 180 degrees around the `y` axis. (matching vanilla)
- translating the cape 2 pixels backwards. (matching vanilla)
- translating the cape a further 1 pixel backwards & upwards if the player has a chest-plate on. (matching vanilla)

No other rotations or translations are applied to the cape, allowing for fully custom animations.

The `cloak` part inside the regular `player.jem` will render if `player_cape.jem` is not present, but will not benefit from having its vanilla animation cancelled by EMF

2.0.2
- fixed the first person hand settings not getting reset correctly in 2.0.1
- added the `is_swinging_right_arm` & `is_swinging_left_arm` boolean variables,
used to distinguish right and left arm swinging in biped models, if no arm is swinging both should be false, if `swing_progress > 0` then one of these should be true.
- added support for an optional `player_cape.jem` model file to be used for better animating the player cape
`player_cape.jem` only contains a `cloak` part, positioned exactly as it is in the regular `player.jem`,
if this model is present it will render in a special way that will not apply the vanilla animations to the cape.
Allowing much easier custom animations
*(note this jem file can not be exported by the EMF config, but the `player.jem` exported model will work perfectly for it, as of v2.0.2)*

The only transforms EMF applies to `player_cape.jem` before rendering & custom animating is:
- rotating the cape 180 degrees around the `y` axis. (matching vanilla)
- translating the cape 2 pixels backwards. (matching vanilla)
- translating the cape a further 1 pixel backwards & upwards if the player has a chest-plate on. (matching vanilla)

No other rotations or translations are applied to the cape, allowing for fully custom animations.

The `cloak` part inside the regular `player.jem` will render if `player_cape.jem` is not present, but will not benefit from having its vanilla animation cancelled by EMF

2.0.2
- fixed the first person hand settings not getting reset correctly in 2.0.1
- added the `is_swinging_right_arm` & `is_swinging_left_arm` boolean variables,
used to distinguish right and left arm swinging in biped models, if no arm is swinging both should be false, if `swing_progress > 0` then one of these should be true.
- added support for an optional `player_cape.jem` model file to be used for better animating the player cape
`player_cape.jem` only contains a `cloak` part, positioned exactly as it is in the regular `player.jem`,
if this model is present it will render in a special way that will not apply the vanilla animations to the cape.
Allowing much easier custom animations
*(note this jem file can not be exported by the EMF config, but the `player.jem` exported model will work perfectly for it, as of v2.0.2)*

The only transforms EMF applies to `player_cape.jem` before rendering & custom animating is:
- rotating the cape 180 degrees around the `y` axis. (matching vanilla)
- translating the cape 2 pixels backwards. (matching vanilla)
- translating the cape a further 1 pixel backwards & upwards if the player has a chest-plate on. (matching vanilla)

No other rotations or translations are applied to the cape, allowing for fully custom animations.

The `cloak` part inside the regular `player.jem` will render if `player_cape.jem` is not present, but will not benefit from having its vanilla animation cancelled by EMF

2.0.2
- fixed the first person hand settings not getting reset correctly in 2.0.1
- added the `is_swinging_right_arm` & `is_swinging_left_arm` boolean variables,
used to distinguish right and left arm swinging in biped models, if no arm is swinging both should be false, if `swing_progress > 0` then one of these should be true.
- added support for an optional `player_cape.jem` model file to be used for better animating the player cape
`player_cape.jem` only contains a `cloak` part, positioned exactly as it is in the regular `player.jem`,
if this model is present it will render in a special way that will not apply the vanilla animations to the cape.
Allowing much easier custom animations
*(note this jem file can not be exported by the EMF config, but the `player.jem` exported model will work perfectly for it, as of v2.0.2)*

The only transforms EMF applies to `player_cape.jem` before rendering & custom animating is:
- rotating the cape 180 degrees around the `y` axis. (matching vanilla)
- translating the cape 2 pixels backwards. (matching vanilla)
- translating the cape a further 1 pixel backwards & upwards if the player has a chest-plate on. (matching vanilla)

No other rotations or translations are applied to the cape, allowing for fully custom animations.

The `cloak` part inside the regular `player.jem` will render if `player_cape.jem` is not present, but will not benefit from having its vanilla animation cancelled by EMF

2.0.2
- fixed the first person hand settings not getting reset correctly in 2.0.1
- added the `is_swinging_right_arm` & `is_swinging_left_arm` boolean variables,
used to distinguish right and left arm swinging in biped models, if no arm is swinging both should be false, if `swing_progress > 0` then one of these should be true.
- added support for an optional `player_cape.jem` model file to be used for better animating the player cape
`player_cape.jem` only contains a `cloak` part, positioned exactly as it is in the regular `player.jem`,
if this model is present it will render in a special way that will not apply the vanilla animations to the cape.
Allowing much easier custom animations
*(note this jem file can not be exported by the EMF config, but the `player.jem` exported model will work perfectly for it, as of v2.0.2)*

The only transforms EMF applies to `player_cape.jem` before rendering & custom animating is:
- rotating the cape 180 degrees around the `y` axis. (matching vanilla)
- translating the cape 2 pixels backwards. (matching vanilla)
- translating the cape a further 1 pixel backwards & upwards if the player has a chest-plate on. (matching vanilla)

No other rotations or translations are applied to the cape, allowing for fully custom animations.

The `cloak` part inside the regular `player.jem` will render if `player_cape.jem` is not present, but will not benefit from having its vanilla animation cancelled by EMF

2.0.2
- fixed the first person hand settings not getting reset correctly in 2.0.1
- added the `is_swinging_right_arm` & `is_swinging_left_arm` boolean variables,
used to distinguish right and left arm swinging in biped models, if no arm is swinging both should be false, if `swing_progress > 0` then one of these should be true.
- added support for an optional `player_cape.jem` model file to be used for better animating the player cape
`player_cape.jem` only contains a `cloak` part, positioned exactly as it is in the regular `player.jem`,
if this model is present it will render in a special way that will not apply the vanilla animations to the cape.
Allowing much easier custom animations
*(note this jem file can not be exported by the EMF config, but the `player.jem` exported model will work perfectly for it, as of v2.0.2)*

The only transforms EMF applies to `player_cape.jem` before rendering & custom animating is:
- rotating the cape 180 degrees around the `y` axis. (matching vanilla)
- translating the cape 2 pixels backwards. (matching vanilla)
- translating the cape a further 1 pixel backwards & upwards if the player has a chest-plate on. (matching vanilla)

No other rotations or translations are applied to the cape, allowing for fully custom animations.

The `cloak` part inside the regular `player.jem` will render if `player_cape.jem` is not present, but will not benefit from having its vanilla animation cancelled by EMF

2.0.2
- fixed the first person hand settings not getting reset correctly in 2.0.1
- added the `is_swinging_right_arm` & `is_swinging_left_arm` boolean variables,
used to distinguish right and left arm swinging in biped models, if no arm is swinging both should be false, if `swing_progress > 0` then one of these should be true.
- added support for an optional `player_cape.jem` model file to be used for better animating the player cape
`player_cape.jem` only contains a `cloak` part, positioned exactly as it is in the regular `player.jem`,
if this model is present it will render in a special way that will not apply the vanilla animations to the cape.
Allowing much easier custom animations
*(note this jem file can not be exported by the EMF config, but the `player.jem` exported model will work perfectly for it, as of v2.0.2)*

The only transforms EMF applies to `player_cape.jem` before rendering & custom animating is:
- rotating the cape 180 degrees around the `y` axis. (matching vanilla)
- translating the cape 2 pixels backwards. (matching vanilla)
- translating the cape a further 1 pixel backwards & upwards if the player has a chest-plate on. (matching vanilla)

No other rotations or translations are applied to the cape, allowing for fully custom animations.

The `cloak` part inside the regular `player.jem` will render if `player_cape.jem` is not present, but will not benefit from having its vanilla animation cancelled by EMF

2.0.2
- fixed the first person hand settings not getting reset correctly in 2.0.1
- added the `is_swinging_right_arm` & `is_swinging_left_arm` boolean variables,
used to distinguish right and left arm swinging in biped models, if no arm is swinging both should be false, if `swing_progress > 0` then one of these should be true.
- added support for an optional `player_cape.jem` model file to be used for better animating the player cape
`player_cape.jem` only contains a `cloak` part, positioned exactly as it is in the regular `player.jem`,
if this model is present it will render in a special way that will not apply the vanilla animations to the cape.
Allowing much easier custom animations
*(note this jem file can not be exported by the EMF config, but the `player.jem` exported model will work perfectly for it, as of v2.0.2)*

The only transforms EMF applies to `player_cape.jem` before rendering & custom animating is:
- rotating the cape 180 degrees around the `y` axis. (matching vanilla)
- translating the cape 2 pixels backwards. (matching vanilla)
- translating the cape a further 1 pixel backwards & upwards if the player has a chest-plate on. (matching vanilla)

No other rotations or translations are applied to the cape, allowing for fully custom animations.

The `cloak` part inside the regular `player.jem` will render if `player_cape.jem` is not present, but will not benefit from having its vanilla animation cancelled by EMF

2.0.2
- fixed the first person hand settings not getting reset correctly in 2.0.1
- added the `is_swinging_right_arm` & `is_swinging_left_arm` boolean variables,
used to distinguish right and left arm swinging in biped models, if no arm is swinging both should be false, if `swing_progress > 0` then one of these should be true.
- added support for an optional `player_cape.jem` model file to be used for better animating the player cape
`player_cape.jem` only contains a `cloak` part, positioned exactly as it is in the regular `player.jem`,
if this model is present it will render in a special way that will not apply the vanilla animations to the cape.
Allowing much easier custom animations
*(note this jem file can not be exported by the EMF config, but the `player.jem` exported model will work perfectly for it, as of v2.0.2)*

The only transforms EMF applies to `player_cape.jem` before rendering & custom animating is:
- rotating the cape 180 degrees around the `y` axis. (matching vanilla)
- translating the cape 2 pixels backwards. (matching vanilla)
- translating the cape a further 1 pixel backwards & upwards if the player has a chest-plate on. (matching vanilla)

No other rotations or translations are applied to the cape, allowing for fully custom animations.

The `cloak` part inside the regular `player.jem` will render if `player_cape.jem` is not present, but will not benefit from having its vanilla animation cancelled by EMF

- added `is_first_person_hand` variable to detect then the model part being rendered is the first person player hand
- added the `player settings` category in the model settings gui
- added a setting to force custom player models to only apply to your own player and not others in multiplayer
- added a setting to forcibly prevent all custom hand animations from playing in first person view
- both are disabled by default
- fixed the `is_sneaking` variable not working correctly, should now line up with all models that have a sneaking pose
- added missing variables to the animation docs
- fixed block entities, and some other edge cases, with texture overrides in the model not rendering at all

- added `is_first_person_hand` variable to detect then the model part being rendered is the first person player hand
- added the `player settings` category in the model settings gui
- added a setting to force custom player models to only apply to your own player and not others in multiplayer
- added a setting to forcibly prevent all custom hand animations from playing in first person view
- both are disabled by default
- fixed the `is_sneaking` variable not working correctly, should now line up with all models that have a sneaking pose
- added missing variables to the animation docs
- fixed block entities, and some other edge cases, with texture overrides in the model not rendering at all

- added `is_first_person_hand` variable to detect then the model part being rendered is the first person player hand
- added the `player settings` category in the model settings gui
- added a setting to force custom player models to only apply to your own player and not others in multiplayer
- added a setting to forcibly prevent all custom hand animations from playing in first person view
- both are disabled by default
- fixed the `is_sneaking` variable not working correctly, should now line up with all models that have a sneaking pose
- added missing variables to the animation docs
- fixed block entities, and some other edge cases, with texture overrides in the model not rendering at all

- added `is_first_person_hand` variable to detect then the model part being rendered is the first person player hand
- added the `player settings` category in the model settings gui
- added a setting to force custom player models to only apply to your own player and not others in multiplayer
- added a setting to forcibly prevent all custom hand animations from playing in first person view
- both are disabled by default
- fixed the `is_sneaking` variable not working correctly, should now line up with all models that have a sneaking pose
- added missing variables to the animation docs
- fixed block entities, and some other edge cases, with texture overrides in the model not rendering at all

- added `is_first_person_hand` variable to detect then the model part being rendered is the first person player hand
- added the `player settings` category in the model settings gui
- added a setting to force custom player models to only apply to your own player and not others in multiplayer
- added a setting to forcibly prevent all custom hand animations from playing in first person view
- both are disabled by default
- fixed the `is_sneaking` variable not working correctly, should now line up with all models that have a sneaking pose
- added missing variables to the animation docs
- fixed block entities, and some other edge cases, with texture overrides in the model not rendering at all

- added `is_first_person_hand` variable to detect then the model part being rendered is the first person player hand
- added the `player settings` category in the model settings gui
- added a setting to force custom player models to only apply to your own player and not others in multiplayer
- added a setting to forcibly prevent all custom hand animations from playing in first person view
- both are disabled by default
- fixed the `is_sneaking` variable not working correctly, should now line up with all models that have a sneaking pose
- added missing variables to the animation docs
- fixed block entities, and some other edge cases, with texture overrides in the model not rendering at all

- added `is_first_person_hand` variable to detect then the model part being rendered is the first person player hand
- added the `player settings` category in the model settings gui
- added a setting to force custom player models to only apply to your own player and not others in multiplayer
- added a setting to forcibly prevent all custom hand animations from playing in first person view
- both are disabled by default
- fixed the `is_sneaking` variable not working correctly, should now line up with all models that have a sneaking pose
- added missing variables to the animation docs
- fixed block entities, and some other edge cases, with texture overrides in the model not rendering at all

- added `is_first_person_hand` variable to detect then the model part being rendered is the first person player hand
- added the `player settings` category in the model settings gui
- added a setting to force custom player models to only apply to your own player and not others in multiplayer
- added a setting to forcibly prevent all custom hand animations from playing in first person view
- both are disabled by default
- fixed the `is_sneaking` variable not working correctly, should now line up with all models that have a sneaking pose
- added missing variables to the animation docs
- fixed block entities, and some other edge cases, with texture overrides in the model not rendering at all

- added `is_first_person_hand` variable to detect then the model part being rendered is the first person player hand
- added the `player settings` category in the model settings gui
- added a setting to force custom player models to only apply to your own player and not others in multiplayer
- added a setting to forcibly prevent all custom hand animations from playing in first person view
- both are disabled by default
- fixed the `is_sneaking` variable not working correctly, should now line up with all models that have a sneaking pose
- added missing variables to the animation docs
- fixed block entities, and some other edge cases, with texture overrides in the model not rendering at all

- added `is_first_person_hand` variable to detect then the model part being rendered is the first person player hand
- added the `player settings` category in the model settings gui
- added a setting to force custom player models to only apply to your own player and not others in multiplayer
- added a setting to forcibly prevent all custom hand animations from playing in first person view
- both are disabled by default
- fixed the `is_sneaking` variable not working correctly, should now line up with all models that have a sneaking pose
- added missing variables to the animation docs
- fixed block entities, and some other edge cases, with texture overrides in the model not rendering at all

- added `is_first_person_hand` variable to detect then the model part being rendered is the first person player hand
- added the `player settings` category in the model settings gui
- added a setting to force custom player models to only apply to your own player and not others in multiplayer
- added a setting to forcibly prevent all custom hand animations from playing in first person view
- both are disabled by default
- fixed the `is_sneaking` variable not working correctly, should now line up with all models that have a sneaking pose
- added missing variables to the animation docs
- fixed block entities, and some other edge cases, with texture overrides in the model not rendering at all

- added `is_first_person_hand` variable to detect then the model part being rendered is the first person player hand
- added the `player settings` category in the model settings gui
- added a setting to force custom player models to only apply to your own player and not others in multiplayer
- added a setting to forcibly prevent all custom hand animations from playing in first person view
- both are disabled by default
- fixed the `is_sneaking` variable not working correctly, should now line up with all models that have a sneaking pose
- added missing variables to the animation docs
- fixed block entities, and some other edge cases, with texture overrides in the model not rendering at all

- added `is_first_person_hand` variable to detect then the model part being rendered is the first person player hand
- added the `player settings` category in the model settings gui
- added a setting to force custom player models to only apply to your own player and not others in multiplayer
- added a setting to forcibly prevent all custom hand animations from playing in first person view
- both are disabled by default
- fixed the `is_sneaking` variable not working correctly, should now line up with all models that have a sneaking pose
- added missing variables to the animation docs
- fixed block entities, and some other edge cases, with texture overrides in the model not rendering at all

- added `is_first_person_hand` variable to detect then the model part being rendered is the first person player hand
- added the `player settings` category in the model settings gui
- added a setting to force custom player models to only apply to your own player and not others in multiplayer
- added a setting to forcibly prevent all custom hand animations from playing in first person view
- both are disabled by default
- fixed the `is_sneaking` variable not working correctly, should now line up with all models that have a sneaking pose
- added missing variables to the animation docs
- fixed block entities, and some other edge cases, with texture overrides in the model not rendering at all

- added `is_first_person_hand` variable to detect then the model part being rendered is the first person player hand
- added the `player settings` category in the model settings gui
- added a setting to force custom player models to only apply to your own player and not others in multiplayer
- added a setting to forcibly prevent all custom hand animations from playing in first person view
- both are disabled by default
- fixed the `is_sneaking` variable not working correctly, should now line up with all models that have a sneaking pose
- added missing variables to the animation docs
- fixed block entities, and some other edge cases, with texture overrides in the model not rendering at all

- texture overrides now give the `missing texture` texture if the texture wasn't found instead of not applying
- fixed first person hand jittering with certain player animation resource-packs
- added the `ifb() randomb() catch()` animation functions
- `ifb()` is a boolean returning version of `if()`
- `randomb()` is a boolean returning version of `random()`
- `catch(x, c, id)` is a new debug function that will always return `x` unless it had an error in which case it will return `c`. `id` is optional and will make the function print the reason `c` was returned to the log with this `id` to identify the printout
- added the `is_jumping` `is_swimming` `is_gliding` `is_right_handed` animation variables
- added the `modelRule modelSuffix var varb global_var global_varb` random properties
- removed the restriction on entity variables making them only accessible from the declaring model *(OptiFine parity)* *(wolf_collar.jem can now correctly access variables set by wolf.jem on the same wolf)*
- added a model display to the model list in the gui to see the model before exporting its .jem file

- added attachment points
- added arrow & spectral_arrow model support
- added new model parts listed in `OptiFine 1.20.4_HD_U_I8_pre3`
- added variables `distance` `is_blocking` `is_crawling` `height_above_ground` `fluid_depth` `fluid_depth_down` `fluid_depth_up`
- added Global variables, they are specified in the format "global_var.<name>" (float) or "global_varb.<name>" (boolean), they are shared by all mobs and block entities and allow more technical things like counting entities
- improved rule_index, now correctly applies 0 when no rule is met
- fixed the `cannot inherit from final class` forge crash returning in v1.3
- moved the variant property into ETF
- fixed crash `.jem failed to load java.lang.NullPointerException: Cannot read the array length because "textureSize" is null`
- added the model file name to crash messages where it was missing
- added `sizeAdd` to the emf model exporting
- the emf model exporting now does 2 export log passes for each model with known OptiFine part names, one pass with, and one without the OptiFine part names. The one without might reveal some extra parts, that do not get used by OptiFine, or have been added by mods
- EMF model part boxes may now additionally declare `sizeAddX sizeAddY sizeAddZ`, as opposed to just `sizeAdd` with OptiFine, for per axis model inflation. `sizeAdd` will still work as before, though will be overridden if the others are present.
- added OptiFine part name definitions for `breeze`, `breeze_eyes`, `breeze_wind`, `wind_charge`
- fixed case where "!(arms.visible)" works but "!arms.visible" doesn't in 1.3
- the directory format for modded models has been changed from `assets/minecraft/optifine/cem/modded/<namespace>/<modelname>.jem` to `assets/<namespace>/optifine/cem/<modelname>.jem`
- the old directory with the /modded/ folder is still supported for now but is considered deprecated
- this change makes things more consistent with modded name spaces
- the `emf/cem/` directory is also valid in these namespaces as well as the ability to put the `<modelname>.jem` file within a folder of the same name, such as `cem/<modelname>/<modelname>.jem`
- added a setting for the animation distance LOD setting, to now factor in an entities size to affect larger entities less
- fixed a crash when methods were directly inverted e.g `!between(....)`
- failed animation expressions will now resolve to `0` when applied to a model part or variable *(OptiFine parity)*
- supports ETF's new config screen builder
- added a category `Animation math details` which lists and explains all functions and variables registered to the animation math system
- added a category `All models` which allows applying certain settings per .jem file as well as selectively disable the loading of certain models
- moved a few settings, mostly for the distance LOD, into the new category `performance settings`
- added settings into the `per entity settings` category to allows applying certain settings to only those entities

- texture overrides now give the `missing texture` texture if the texture wasn't found instead of not applying
- fixed first person hand jittering with certain player animation resource-packs
- added the `ifb() randomb() catch()` animation functions
- `ifb()` is a boolean returning version of `if()`
- `randomb()` is a boolean returning version of `random()`
- `catch(x, c, id)` is a new debug function that will always return `x` unless it had an error in which case it will return `c`. `id` is optional and will make the function print the reason `c` was returned to the log with this `id` to identify the printout
- added the `is_jumping` `is_swimming` `is_gliding` `is_right_handed` animation variables
- added the `modelRule modelSuffix var varb global_var global_varb` random properties
- removed the restriction on entity variables making them only accessible from the declaring model *(OptiFine parity)* *(wolf_collar.jem can now correctly access variables set by wolf.jem on the same wolf)*
- added a model display to the model list in the gui to see the model before exporting its .jem file

- added attachment points
- added arrow & spectral_arrow model support
- added new model parts listed in `OptiFine 1.20.4_HD_U_I8_pre3`
- added variables `distance` `is_blocking` `is_crawling` `height_above_ground` `fluid_depth` `fluid_depth_down` `fluid_depth_up`
- added Global variables, they are specified in the format "global_var.<name>" (float) or "global_varb.<name>" (boolean), they are shared by all mobs and block entities and allow more technical things like counting entities
- improved rule_index, now correctly applies 0 when no rule is met
- fixed the `cannot inherit from final class` forge crash returning in v1.3
- moved the variant property into ETF
- fixed crash `.jem failed to load java.lang.NullPointerException: Cannot read the array length because "textureSize" is null`
- added the model file name to crash messages where it was missing
- added `sizeAdd` to the emf model exporting
- the emf model exporting now does 2 export log passes for each model with known OptiFine part names, one pass with, and one without the OptiFine part names. The one without might reveal some extra parts, that do not get used by OptiFine, or have been added by mods
- EMF model part boxes may now additionally declare `sizeAddX sizeAddY sizeAddZ`, as opposed to just `sizeAdd` with OptiFine, for per axis model inflation. `sizeAdd` will still work as before, though will be overridden if the others are present.
- added OptiFine part name definitions for `breeze`, `breeze_eyes`, `breeze_wind`, `wind_charge`
- fixed case where "!(arms.visible)" works but "!arms.visible" doesn't in 1.3
- the directory format for modded models has been changed from `assets/minecraft/optifine/cem/modded/<namespace>/<modelname>.jem` to `assets/<namespace>/optifine/cem/<modelname>.jem`
- the old directory with the /modded/ folder is still supported for now but is considered deprecated
- this change makes things more consistent with modded name spaces
- the `emf/cem/` directory is also valid in these namespaces as well as the ability to put the `<modelname>.jem` file within a folder of the same name, such as `cem/<modelname>/<modelname>.jem`
- added a setting for the animation distance LOD setting, to now factor in an entities size to affect larger entities less
- fixed a crash when methods were directly inverted e.g `!between(....)`
- failed animation expressions will now resolve to `0` when applied to a model part or variable *(OptiFine parity)*
- supports ETF's new config screen builder
- added a category `Animation math details` which lists and explains all functions and variables registered to the animation math system
- added a category `All models` which allows applying certain settings per .jem file as well as selectively disable the loading of certain models
- moved a few settings, mostly for the distance LOD, into the new category `performance settings`
- added settings into the `per entity settings` category to allows applying certain settings to only those entities